FLHR GPS Mounts
#1
#2
#3
I have that plugs into my battery tender on one end and is a standard 12V on the other going into a
. Stuck at work, but provided links. Yes, kinda ghetto on a new RK, but it's all I had left after picking it up last week.
#4
#5
Join Date: Aug 2013
Location: Somewhere on the Bourbon trail
Posts: 5,424
Received 1,503 Likes
on
1,073 Posts
I use a Techmount for my Garmin as I like the position centered over the bar cover. I also use a waterproof USB power port from 3BR Powersport that plugs into the acc. connector under the seat and use the acc. switch for on/off. I also use it to charge my iPhone.
http://www.techmounts.com
https://www.3brpowersports.com/products.php - TAPP-HD USB on the page
https://www.3brpowersports.com/produ...d_Band_USB.php - GPS power cable at bottom of page
http://www.techmounts.com
https://www.3brpowersports.com/products.php - TAPP-HD USB on the page
https://www.3brpowersports.com/produ...d_Band_USB.php - GPS power cable at bottom of page
Last edited by RKZen; 09-12-2015 at 06:17 AM.
#7
I used this setup when I had my '11 Street Glide
I know there are several ways members have mounted their GPS, and this is how I mounted my Garmin 1450
First off, a picture of the completed setup. You can also see the Riders Claw mount for my iPod Touch.
Here is what I used.
For power, I just used the standard cigarette lighter outlet.
But I didn't use the standard auto power adapter, due to fuel tank interference.
The setup I used will NOT hit the fuel tank. Full lock left to full lock right, no interference.
Cigarette Lighter to USB adapter
This adapter mounts flush with the fairing surface.
Then I used a USB power cable. Some say you can use the USB cable that comes with the Garmin. But that is really intended as a "data" cable and when I plugged it in, I never could get it to power up the GPS.
So, I purchased one here:
USB Charging Cable
3BR Powersports
Click the link, then scroll down to the USB Power Cables
http://www.3brpowersports.com/products_usb_cables.php
For the handle bar mount, I used this:
GPS Mount
Motomount
http://www.motomount.net/products/ga...uvi-gps-mount/
For stock bars, use 1"
Then I mounted the GPS with these RAM Mount products
gpscity.com
http://www.gpscity.com/
RAM Mount Diamond Plate with 1 inch Ball RAM-B-238U
Model: RAM-B-238U SKU:RAMB238
For the Garmin 1400 series (Buy the one that fits your GPS Model)
RAM Mount Garmin nuvi 1490T Cradle RAM-HOL-GA35U
Model: RAM-HOL-GA35U SKU:RAMHOLGA35
RAM Mount Short Arm B-Socket RAM-B-201U-A
Model: RAM-B-201U-A SKU:RAMB201A
A few other setups others are using in this thread: https://www.hdforums.com/forum/touri...gps-mount.html
I know there are several ways members have mounted their GPS, and this is how I mounted my Garmin 1450
First off, a picture of the completed setup. You can also see the Riders Claw mount for my iPod Touch.
Here is what I used.
For power, I just used the standard cigarette lighter outlet.
But I didn't use the standard auto power adapter, due to fuel tank interference.
The setup I used will NOT hit the fuel tank. Full lock left to full lock right, no interference.
Cigarette Lighter to USB adapter
This adapter mounts flush with the fairing surface.
Then I used a USB power cable. Some say you can use the USB cable that comes with the Garmin. But that is really intended as a "data" cable and when I plugged it in, I never could get it to power up the GPS.
So, I purchased one here:
USB Charging Cable
3BR Powersports
Click the link, then scroll down to the USB Power Cables
http://www.3brpowersports.com/products_usb_cables.php
For the handle bar mount, I used this:
GPS Mount
Motomount
http://www.motomount.net/products/ga...uvi-gps-mount/
For stock bars, use 1"
Then I mounted the GPS with these RAM Mount products
gpscity.com
http://www.gpscity.com/
RAM Mount Diamond Plate with 1 inch Ball RAM-B-238U
Model: RAM-B-238U SKU:RAMB238
For the Garmin 1400 series (Buy the one that fits your GPS Model)
RAM Mount Garmin nuvi 1490T Cradle RAM-HOL-GA35U
Model: RAM-HOL-GA35U SKU:RAMHOLGA35
RAM Mount Short Arm B-Socket RAM-B-201U-A
Model: RAM-B-201U-A SKU:RAMB201A
A few other setups others are using in this thread: https://www.hdforums.com/forum/touri...gps-mount.html
Last edited by RollaMo; 09-12-2015 at 07:48 AM.
Trending Topics
#8
FLHR GPS Mounts
Originally Posted by RKZen
I use a Techmount for my Garmin as I like the position centered over the bar cover. I also use a waterproof USB power port from 3BR Powersport that plugs into the acc. connector under the seat and use the acc. switch for on/off. I also use it to charge my iPhone.
http://www.techmounts.com
https://www.3brpowersports.com/products.php - TAPP-HD USB on the page
https://www.3brpowersports.com/produ...d_Band_USB.php - GPS power cable at bottom of page
http://www.techmounts.com
https://www.3brpowersports.com/products.php - TAPP-HD USB on the page
https://www.3brpowersports.com/produ...d_Band_USB.php - GPS power cable at bottom of page
The mount and the position is great
#9
Join Date: Mar 2012
Location: Socialist Republic of the USA
Posts: 11,232
Likes: 0
Received 16 Likes
on
13 Posts
I used this setup when I had my '11 Street Glide
I know there are several ways members have mounted their GPS, and this is how I mounted my Garmin 1450
First off, a picture of the completed setup. You can also see the Riders Claw mount for my iPod Touch.
Here is what I used.
For power, I just used the standard cigarette lighter outlet.
But I didn't use the standard auto power adapter, due to fuel tank interference.
The setup I used will NOT hit the fuel tank. Full lock left to full lock right, no interference.
Cigarette Lighter to USB adapter
Amazon.com: Griffin PowerJolt Dual Universal Micro: MP3 Players & Accessories
This adapter mounts flush with the fairing surface.
Then I used a USB power cable. Some say you can use the USB cable that comes with the Garmin. But that is really intended as a "data" cable and when I plugged it in, I never could get it to power up the GPS.
So, I purchased one here:
USB Charging Cable
3BR Powersports
Click the link, then scroll down to the USB Power Cables
http://www.3brpowersports.com/products_usb_cables.php
For the handle bar mount, I used this:
GPS Mount
Motomount
http://www.motomount.net/products/ga...uvi-gps-mount/
For stock bars, use 1"
Then I mounted the GPS with these RAM Mount products
gpscity.com
http://www.gpscity.com/
RAM Mount Diamond Plate with 1 inch Ball RAM-B-238U
Model: RAM-B-238U SKU:RAMB238
For the Garmin 1400 series (Buy the one that fits your GPS Model)
RAM Mount Garmin nuvi 1490T Cradle RAM-HOL-GA35U
Model: RAM-HOL-GA35U SKU:RAMHOLGA35
RAM Mount Short Arm B-Socket RAM-B-201U-A
Model: RAM-B-201U-A SKU:RAMB201A
A few other setups others are using in this thread: https://www.hdforums.com/forum/touri...gps-mount.html
I know there are several ways members have mounted their GPS, and this is how I mounted my Garmin 1450
First off, a picture of the completed setup. You can also see the Riders Claw mount for my iPod Touch.
Here is what I used.
For power, I just used the standard cigarette lighter outlet.
But I didn't use the standard auto power adapter, due to fuel tank interference.
The setup I used will NOT hit the fuel tank. Full lock left to full lock right, no interference.
Cigarette Lighter to USB adapter
Amazon.com: Griffin PowerJolt Dual Universal Micro: MP3 Players & Accessories
This adapter mounts flush with the fairing surface.
Then I used a USB power cable. Some say you can use the USB cable that comes with the Garmin. But that is really intended as a "data" cable and when I plugged it in, I never could get it to power up the GPS.
So, I purchased one here:
USB Charging Cable
3BR Powersports
Click the link, then scroll down to the USB Power Cables
http://www.3brpowersports.com/products_usb_cables.php
For the handle bar mount, I used this:
GPS Mount
Motomount
http://www.motomount.net/products/ga...uvi-gps-mount/
For stock bars, use 1"
Then I mounted the GPS with these RAM Mount products
gpscity.com
http://www.gpscity.com/
RAM Mount Diamond Plate with 1 inch Ball RAM-B-238U
Model: RAM-B-238U SKU:RAMB238
For the Garmin 1400 series (Buy the one that fits your GPS Model)
RAM Mount Garmin nuvi 1490T Cradle RAM-HOL-GA35U
Model: RAM-HOL-GA35U SKU:RAMHOLGA35
RAM Mount Short Arm B-Socket RAM-B-201U-A
Model: RAM-B-201U-A SKU:RAMB201A
A few other setups others are using in this thread: https://www.hdforums.com/forum/touri...gps-mount.html
I would add that when I got the ball mount the company I ordered it from sent a sticky back tether which adhered to the back of the GPS just in case it became dislodged (which it never did).
Last edited by mikelikesbikes; 09-12-2015 at 09:21 AM.