I would like to move the license plate to underneath the tail light and remove the old cross bar that ties to the fender struts. Hadn't had any luck finding the license plate bracket, or the plugs that go into the struts.
Anyone have any links or pointers?

Also
Where did you end up putting the inspection sticker? I'm thinking inside my bag.

 

Kuryakyn has the license relocation kit and I believe Custom Dynamics has the lights that act as plugs for the ends when you remove the stock license bracket.

 

Puzzled is a member here......go to classified section .....he sells a kit

https://www.hdforums.com/m_1626000/m...tm.htm#2195392

 

Thanks to all. Ordered it.

 

I did all that to my bike a while back. A friend made my license plate reloaction bracket, I made the brackets to remove the rear bar (cnc cut form plate steel). I have a few extra rear bar elimininator brackets in the garage. $10 a set you pay shipping.

Here are a couple pics.

Glenn

 

Here is one way of getting rid of the grab bar...

lp

[IMG]local://upfiles/7297/5D7B94CF0FD4428094056A515CA15E0E.jpg[/IMG]

[IMG]local://upfiles/7297/B7215D74E30B4C58928DB106A9469D6C.jpg[/IMG]

 

LP......................Great looking! Any information on where you got it would be greatly appreciated.

Ride Safe,

Mike

 

I bought them from Klockwerks. Little more expensive than just capping the strut ends off...but I like this look better.

http://www.kustombaggers.com/products/?id=64

lp

 

not one single wiseguy ,

I use TP unless I'm all crusty then I'll use a wet wipe.

ok now there's one

 

Very Nice! Might be a future upgrade for mine.

Ride Safe,

Mike