I need some help with my Thundermax (Tmax) with autotune.

I have read so much information, I am officially confused.

The bike is running great.

So, what’s the problem?

I want better fuel mileage (MPG).

I am running map #393.

My bike setup is listed below my sig. picture.

Could someone tell me how to adjust this map for better fuel economy?

Or, show/email me a fuel economy version of this map.

Or, just explain it to me.

Thanks for you help in advance.

 

Do you have the software that allows you to adjust set the a/f ratio?

I watched my tuner set the baseline a/f on a T-Max bike they that they just did S&S 106" kit on.

 

Yes, I do have the software.

 

What are you getting for MPG the way it is now?
What is your AFR set at?
Sounds like you may need to lean her out a bit if you want better gas mileage.

 

32-35 MPG

I'm in closed loop running the canned #393 map.

Yes, that's what I'm asking. What adjustments do I make and where in the map to lean it out without destroying the power?

 

Ouch, that is low...
Let me go out and see what I am running at - I keep the laptop in the garage. Please stand by...

 

Dang thing needs to reboot, anyway...
What HQ cam are you running?

Go to the toolbar
and click Configure,- Closed Loop MODULE,- Settings

If I remember correctly the base afr starts at 13. something for the base map. Read the module and see what the current setting are that the AT module has set.

 

any luck?

 

I am not near the bike right now.
When I get home, I'll download he settings and post.
Thanks for the help.

 

Just email me if I can help, easier than posting. Good luck!