What's the Best Value in High-Flow Air Cleaners?
#1
#3
Ness unit it cheap, not just inexpensive.... cheap.
I have seen a ton of them crack the backplates. Additionally, those are very difficult to plumb the hot muchous-like oily muk from the head breathers out of ~ due to the fact that they vent through the casting.
Best on going is the Doherty. Pricey, but billet w/some of the best machining you'll find. It also looks great.
I have seen a ton of them crack the backplates. Additionally, those are very difficult to plumb the hot muchous-like oily muk from the head breathers out of ~ due to the fact that they vent through the casting.
Best on going is the Doherty. Pricey, but billet w/some of the best machining you'll find. It also looks great.
#4
#5
#7
Here's AI tech article on the Doherty. Wish I had read it before buying a SE. This was the first of a two part article and the only one I could find on their web site. Without digging out my old copies I don't know if the chart is the corrected one or not.
http://www.aimag.com/pdfs/5-08%20Doherty%20Tech.pdf
http://www.aimag.com/pdfs/5-08%20Doherty%20Tech.pdf
Trending Topics
#9
Whatever you buy stay away from JET; Johnson Engine Technology. There unit looks nice until you try to install it. The hole doesn't line up with the EFI straight. When you call the guy that own's the place he act's like a total ahole that could'nt possible have a problem with his product and also makes you feel like you're trying to rip him off by telling him there is aproblem. I used a die grinder and hand fitted it because I like the overall design.