Ignition switch problem HELP!!
#1
Ignition switch problem HELP!!
I removed the ignition switch to get the fairing cap off for fork oil change. When I put it back together I got the inner tumblers out of sync. I read several posts and video from this site with help on getting it realigned. I got it realigned and inserted the switch. It went all the way in and locked at at the bottom. Now the key will turn to unlock, and can be removed (barrel key), but the switch is not unlocked. I can't turn the key past the unlock position to the lock position and nothing will move. The switch isn't binding or anything it has a bit of movement like it normally does when locked. It is in the fork lock position, but the forks are not locked. I pushed the button on the bottom of the switch with a screwdriver to try to pull it back out but that won't release it either. Anyone have any help short of taking it to the dealer. Thanks in advance
#2
#3
#4
Yes .. pushed the button turned the key and it pulled out. And I didn't have the forks locked when I took it out .. Dumba$$ move on my part
#5
If the switch went in it should come back out, if you can get it out turn the bars to the left, reach in the switch and lock the forks with a screw driver and allign the ign tumbler and install the ****. I know how frustrating it can be, been there. Don't force anything as it goes easy when everything is lined up. There's an excellent switch removal & install video on here I saw it last week
Last edited by DPete; 02-15-2010 at 12:20 PM.
#7
If the switch went in it should come back out, if you can get it out turn the bars to the left, reach in the switch and lock the forks with a screw driver and allign the ign tumbler and install the ****. I know how frustrating it can be, been there. Don't force anything as it goes easy when everything is lined up. There's an excellent switch removal & install video on here I saw it last week
Trending Topics
#9
#10