Any comments on extended shift and/or brake levers?

I am a member of the no-heel-shift-camp, and am looking to get a little more room on my floorboards, but am also looking to get a better match for when wearing boots.
If I set my shift lever height up to easily fit the toe of my boot it's too high off the floorboard, and the next CCW rotation of the spline makes it too low for the toe to fit under.

I'd also like to move the brake pedal out and down a bit.

I'll experiment with floorboard angle and shift lever position to see if I can find a happy medium, but would certainly appreciate some input from anyone who may have already swapped either, or both, for something like the Kuryakyn extended shift and brake levers.

 

I have the ones made by EZ Brake. Well-made and plenty of room now, combined with floorboard extensions.

 

I ended up with 2 sets.......(double ordered/my dumb)......they are great. More room on the board and braking is a ton better.

http://www.waltersworkshop.com/


$160.00 shipped....new in package. I have 09 RK.

 

I put the Softbrake extended brake and shifter lever on my RKC. also have the HarleyGoodies extensions and extended touring pans. lots of room.

 

why not return one set jack

 

+1 Ezy Brake and Ezy Shift with floorboard extenders and ISO Boards. Loads of room and nothing on my boards except my feet!

 

I put them up on a shelf months ago and never "got around to it "

 

Big D did you do the one out and one up by Kuryakyn?

 

I have the extended shift levers, and the floorboard spacers.

I also have the Kuryakyn brake lever. I'm very happy with the setup. My foot is no longer "trapped" under the brake pedal.

 

I wouldn't be without my extended shift lever (for the heal side only) from Walter's Workshop. One of the best and simplest mods I've ever done.