What did you do to your bagger today?
#8692
Yup, Arlen Ness "angled" fender extension. Fits better than OEM IMHO. Real easy install, and CD LED tri-bar light fits like a glove. Mounts the same as OEM light. Actually CD came out with an updated design recently that hooks up like OEM light and doesn't require an extra wiring harness you may have seen on youtube videos.
#8693
been struggling with my air ride due to solenoid valve failing. Ran across a post on amazon that says removal of the nut seemed to fix the problem. As retarded as that sounded, it worked! I removed the nut from the 12v solenoid and fashioned some electircal tape on it to hold the 12v power to the aluminum valve body and all of the sudden, it doesn't leak anymore. I also added a tank as I wanted to speed up the up time when necessary. That part I like a lot! Will post video on YouTube and add a link later.
I have this style of valve:
http://www.ebay.com/itm/12V-DC-1-4-2...YAAOSwstxVJIPg - didnt buy it on eBay but it was what was sent with the kit.
Anyway, I'll be looking for a replacement in this style with brass valve body to replace it and have as a backup:
http://www.ebay.com/itm/1-4-2-Way-No...gAAOSwBnVW-eSP
No idea why these just randomly stop holding air all of the sudden... what a PITA!
I have this style of valve:
http://www.ebay.com/itm/12V-DC-1-4-2...YAAOSwstxVJIPg - didnt buy it on eBay but it was what was sent with the kit.
Anyway, I'll be looking for a replacement in this style with brass valve body to replace it and have as a backup:
http://www.ebay.com/itm/1-4-2-Way-No...gAAOSwBnVW-eSP
No idea why these just randomly stop holding air all of the sudden... what a PITA!
#8694
Yup, Arlen Ness "angled" fender extension. Fits better than OEM IMHO. Real easy install, and CD LED tri-bar light fits like a glove. Mounts the same as OEM light. Actually CD came out with an updated design recently that hooks up like OEM light and doesn't require an extra wiring harness you may have seen on youtube videos.
The following users liked this post:
! rock103 ! (04-29-2016)
#8695
Rock 103, that's a fine lookin bike ya got there!
With the Ness fender extension would you still have room to install the CD Plasma Rods between the fascia and the bags?
With the Ness fender extension would you still have room to install the CD Plasma Rods between the fascia and the bags?
#8697
Decided to get rid of red reflectors on saddlebag latches. On a black and chrome ride, my eye kept being drawn to the red. More likely after read it here then started noticing. Found clear reflectors on Amazon...much better.
#8699
Xotic Air Remote Air installed! System was an add on to the Xotic Air Shocks I already had on the bike. Added tank and remote receiver and re-wired the system to draw air from tank to the shocks vs direct to shocks from compressor. Hopefully the solenoid update I added fixes the issues with the system failing or sticking open and losing air. Fun to watch...
Complete walk around of bike with fairing and updated remote air ride:
Complete walk around of bike with fairing and updated remote air ride:
Last edited by xmen9c; 05-01-2016 at 10:59 AM. Reason: added 2nd video
#8700
Xotic Air Remote Air installed! System was an add on to the Xotic Air Shocks I already had on the bike. Added tank and remote receiver and re-wired the system to draw air from tank to the shocks vs direct to shocks from compressor. Hopefully the solenoid update I added fixes the issues with the system failing or sticking open and losing air. Fun to watch...
2013 Road King Classic w/Xotic remote air ride - YouTube
Complete walk around of bike with fairing and updated remote air ride:
2013 Road King Classic w/Blacked out Freedom Performance 36 Fish Tail exhaust, Xotic Air - YouTube
2013 Road King Classic w/Xotic remote air ride - YouTube
Complete walk around of bike with fairing and updated remote air ride:
2013 Road King Classic w/Blacked out Freedom Performance 36 Fish Tail exhaust, Xotic Air - YouTube
The following users liked this post:
xmen9c (05-02-2016)