I'll be changing my lowers out this weekend with black powder coat, I have a manual and looks like a pretty easy deal.I have one question, what screws, washers, bushings and seals are recommended to be replaced when putting the new lowers on. I have a 09 street glide, any and all part numbers would be great to have so I can have the wife bring them home from work this week.

 

Has anyone done this before and replaced parts or do I just reuse them?

 

Can't give you the P/N's cause I have an 07 and don't know if they changed anything. You can go to http://partsfinder.onlinemicrofiche..../showmodel.asp and write them down yourself. Have to add to cart to get P/N's. I replaced all seals, wear rings and the drain screws and two screws in the bottom (screws come with new copper washers). Pretty easy air gun for bottom screws makes it easier and it's a metric allen head. Keep it clean and take your time. Lots of step by steps on here with pics. Put your front wheel back on in the right rotation.
Good Luck

 

Thank you X Iron, thats the information I was needing. Wife does finance and insurance at a dealership do I just had her pick the parts up before she left work today.

 

I replaced all the parts that I outlined in the image below in the blue squares. Remember that this is for one fork and you'll need 2 of each.