2004 ROAD KING Upgrades- Almost done!!
#1
2004 ROAD KING Upgrades- Almost done!!
I didn’t realize how hard it was to hide all this stuff from my wife, damn!!
2004 Road King- I changed out the fuel pump, filter, pressure regulator & housing, check valve, Andrews TW-21 cams, bearings, tensioners, gaskets in rocker box, S&S Power Tune, S&S teardrop air cleaner and Hogworkz LED brake lights/rear turn signals w/ magic strobe.
Waiting for my slightly used Cobra fi 2000 PowrPro Black to show up tomorrow and we’re firing this baby up!!
2004 Road King- I changed out the fuel pump, filter, pressure regulator & housing, check valve, Andrews TW-21 cams, bearings, tensioners, gaskets in rocker box, S&S Power Tune, S&S teardrop air cleaner and Hogworkz LED brake lights/rear turn signals w/ magic strobe.
Waiting for my slightly used Cobra fi 2000 PowrPro Black to show up tomorrow and we’re firing this baby up!!
Last edited by ScooterScotty; 02-06-2022 at 05:26 PM. Reason: Adding
The following 3 users liked this post by ScooterScotty:
#2
The following users liked this post:
ScooterScotty (02-06-2022)
#3
The following users liked this post:
ScooterScotty (02-06-2022)
#5
#6
Silly me. I accidentally showed her how my rear cylinder split exhaust WASN’T cracked, but I got exhaust anyhow. Tell me what do I say now? It cracked when I took it off?? Haha.
I started this project with only intending on changing the tensioners and rocker gaskets (because I reused the stock pushrods). The deeper I got, I started thinking- Well, I’m here now, might as well add new cams. Well, ****, that S&S teardrop air cleaner would look awfully nice on this bike. Why am I doing all this work and not putting new headers on??
it just snow-balled out of control and now I’m scared fellas! Lmao
The following users liked this post:
Low budget Dan (02-08-2022)
#7
I started this project with only intending on changing the tensioners and rocker gaskets (because I reused the stock pushrods). The deeper I got, I started thinking- Well, I’m here now, might as well add new cams. Well, ****, that S&S teardrop air cleaner would look awfully nice on this bike. Why am I doing all this work and not putting new headers on??
it just snow-balled out of control
Funny how that happens....
The following users liked this post:
ScooterScotty (02-09-2022)
Trending Topics
The following users liked this post:
ScooterScotty (02-09-2022)
#10