Removing the front fairing?
#1
#2
im guessing its like my street glide. if so three bolts up at windshield, bolt on each side below where street glide fairing mirrors are attached( i think yours doesnt have mirrors attached to fairing but look and you'll see the bolts im talking about), and a bolt on each side through the lower fairing skirt. total of seven bolts. You"ll have to unplug your headlight when removing the outer fairing and connector on mine u just pull to unplug. Make sure you remove your main fuse, look behind bodypanel on left side of bike under seat. You'll see a large, i think orange fuse. This one is very important, make sure you cover your front fender with a mechanics fender protector, pillow, comforter, whatever will keep it from getting dented in case the outer fairing falls. Ask me how i know this can happen. Yep, dont take much to dent much less put a nice scratch on a fender
#5
Here's a link to an excellent write up from Bubbas1 on how to remove your fairing. It covers removing both the outer and inner fairing. I used it when I installed my new speakers in my fairing.
https://www.hdforums.com/forum/touri...ep-w-pics.html
https://www.hdforums.com/forum/touri...ep-w-pics.html
#6
the 'spot lights' can go on with the fairing in place, the light bar mounts on the outside on the sides of the triple tree.----( cover your fender with a towel while wrestling this into place)
if you are looking for the wiring- It may just be tucked up out of the way.
welcome to the forums, year and model are always good info to provide
mike
if you are looking for the wiring- It may just be tucked up out of the way.
welcome to the forums, year and model are always good info to provide
mike
Last edited by mkguitar; 09-23-2011 at 01:29 PM.
#7