Go Back   Harley Davidson Forums > Harley Davidson Motorcycles > Touring Models
Sign in using an external account
Register Forgot Password?
Search


Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by: Fuel Moto USA

Reply
 
 
 
P
 
Thread Tools Search this Thread
  #1  
Old 04-16-2012, 11:17 AM
OWOF's Avatar
OWOF OWOF is offline
One Of The Regulars
Join Date: May 2011
Location: Florida
Posts: 232
Default Wiring Tour Pak to 2012 FLHX

If this is redundant, I didn't see it anywhere.
Techs told me there was no turn/brake/run harness connection on 2012's. That I had to tap into wires and make a harness. Went on a witch hunt and there's a lighting harness on right side of ECM behind the extra length of antenna cable. It's a molex male/female and has all 6-wires for lighting.

I went to HD but they were only able to order the plugs (didn't stock them) but could not get the pins. I went on ebay and found MOLEX kit with male, female, and all 12 pins for $12. & free shipping. I'm taking my exisiting tour pak conection pigtail (I used on my 2009 FLHX) and replacing the ends with the molex to adapt to the 2012 FLHX and jack right into the lighting harness.
MOLEX 33472-0601 AND 33482-0601

I did a search for an easier way or plug location to connect the tour pak a few weeks ago, but found none. So I don't think this will be a repost. Hopefully this will help someone else and why doesn't HD make a molex pigtail?
__________________

1978 Shovelhead rigid/springer, suicide shift, 2" open belt, kickstart (no starter problems here)
2013 Breakout - Big Radius
2012 Street Glide:Rokker 250 amp & 3-way speakers, S & S Headers, V & Hines Twin SLash, 255SE Cams, LED headlight and passing lights, Gator Tail
I rode mine to Daytona since 1976

Last edited by OWOF; 04-16-2012 at 11:21 AM..
Reply With Quote
  #2  
Old 04-16-2012, 12:04 PM
ThunderBueller's Avatar
ThunderBueller ThunderBueller is offline
Road Master
Join Date: Oct 2010
Location: Farmington, MN
Posts: 863
Default

I ended up getting a Molex T-connector from Ride Time Technology since I don't have a Molex compatible crimper.

http://ridetimetechnology.com/
__________________
Tom S.
2010 FLTRX--Primo paint set #83
2005 FXSTB--Sold
2003 XL1200C--Sold
2002 Buell S3T Thunderbolt--Sold

Reply With Quote
  #3  
Old 04-16-2012, 12:17 PM
aviscomi's Avatar
aviscomi aviscomi is offline
Outstanding HDF Member
Join Date: Jul 2007
Location: Philadelphia
Posts: 2,069
tviscomi
Default

OWOF...I had to "rig up" a Y-Molex Harness in order to use my Tour PAk on my 2010 SG. Here's where I bought all the connectors at:

http://www.namzcustomcycleproducts.com/products.html
__________________
2014 Ultra Limited Charcoal Pearl & Brilliant Silver, HD Street Cannons, HD Stage 1 A/C, V&H FP3
Reply With Quote
  #4  
Old 04-16-2012, 02:23 PM
OWOF's Avatar
OWOF OWOF is offline
One Of The Regulars
Join Date: May 2011
Location: Florida
Posts: 232
Default

I have an existing pigtail fom my 09 FLHX. So all I needed was the 2 molex ends to redo it.
__________________

1978 Shovelhead rigid/springer, suicide shift, 2" open belt, kickstart (no starter problems here)
2013 Breakout - Big Radius
2012 Street Glide:Rokker 250 amp & 3-way speakers, S & S Headers, V & Hines Twin SLash, 255SE Cams, LED headlight and passing lights, Gator Tail
I rode mine to Daytona since 1976
Reply With Quote
  #5  
Old 04-16-2012, 02:34 PM
Harleypingman's Avatar
Harleypingman Harleypingman is offline
Extreme HDF Member
Join Date: Apr 2006
Location: Roswell, GA
Posts: 10,378
Default

Quote:
Originally Posted by OWOF View Post
If this is redundant, I didn't see it anywhere.
Techs told me there was no turn/brake/run harness connection on 2012's. That I had to tap into wires and make a harness. Went on a witch hunt and there's a lighting harness on right side of ECM behind the extra length of antenna cable. It's a molex male/female and has all 6-wires for lighting.

I went to HD but they were only able to order the plugs (didn't stock them) but could not get the pins. I went on ebay and found MOLEX kit with male, female, and all 12 pins for $12. & free shipping. I'm taking my exisiting tour pak conection pigtail (I used on my 2009 FLHX) and replacing the ends with the molex to adapt to the 2012 FLHX and jack right into the lighting harness.
MOLEX 33472-0601 AND 33482-0601

I did a search for an easier way or plug location to connect the tour pak a few weeks ago, but found none. So I don't think this will be a repost. Hopefully this will help someone else and why doesn't HD make a molex pigtail?
If you wanted a turn/run/brake set-up on an Ultra tour pak, this accessory from HD might work since it doesn't use the tour pak harness under the left side cover--instead, it uses a Y-connector in the rear lighting connector under the seat:

http://www.harley-davidson.com/gma/g...bmLocale=en_US

Good luck with your project.

Carl

PS: I believe ridetime has a kit, similar to HD's, but it also changes the side marker lights to turn signals as well.
__________________

CMA, Crossties Chapter (GA)
IBA 26580
'04 FLHTPX

Last edited by Harleypingman; 04-17-2012 at 05:18 PM..
Reply With Quote
  #6  
Old 04-17-2012, 05:01 PM
OWOF's Avatar
OWOF OWOF is offline
One Of The Regulars
Join Date: May 2011
Location: Florida
Posts: 232
Default

My 09 flhx had a connector under the seat for a pigtail. The 2012's do not. It was changed to a molex connector on right side of ECM.
__________________

1978 Shovelhead rigid/springer, suicide shift, 2" open belt, kickstart (no starter problems here)
2013 Breakout - Big Radius
2012 Street Glide:Rokker 250 amp & 3-way speakers, S & S Headers, V & Hines Twin SLash, 255SE Cams, LED headlight and passing lights, Gator Tail
I rode mine to Daytona since 1976
Reply With Quote
  #7  
Old 04-17-2012, 05:23 PM
Harleypingman's Avatar
Harleypingman Harleypingman is offline
Extreme HDF Member
Join Date: Apr 2006
Location: Roswell, GA
Posts: 10,378
Default

Quote:
Originally Posted by OWOF View Post
My 09 flhx had a connector under the seat for a pigtail. The 2012's do not. It was changed to a molex connector on right side of ECM.
Thanks for the clarification on the '12's regarding the connector under the seat.

Doesn't the '12 SG still have a three position Multilock connector under the left side cover as previous models have? It would be identified as the "tour pak harness" on a wiring diagram and is part of the main wiring harness. On previous SG's, that tour pak harness was used for the tri-bar light in the bottom of the rear fender fascia. On Ultras, it's used for the tour pak lights.

I guess I'll stop by my local dealer to check the wiring diagram in the '12 Touring model service manual since I'm curious.

Carl
__________________

CMA, Crossties Chapter (GA)
IBA 26580
'04 FLHTPX
Reply With Quote
  #8  
Old 04-17-2012, 05:35 PM
mkguitar mkguitar is offline
Extreme HDF Member
Join Date: Sep 2010
Location: Phoenix
Posts: 10,468
Default

I used a "flat 4" trailer like plug on mine ( for ground, run, brake and 12volt power for accs like phone chargers).

spliced in under the seat.

tidy, water proof, has indicator leds for trouble shooting.

$12 or so at pepboys.

male plug from tour pack is 12" long ( and when in place the connectors velcro to inside of T/P mount)
the female from the bike runs from under the seat, under the right side cover, along the frame rail, and when not in use is velcro'd to the top of the shock


mike
__________________
The smarter you spend- the more bikes you can buy!
Reply With Quote
  #9  
Old 04-20-2012, 07:31 PM
OWOF's Avatar
OWOF OWOF is offline
One Of The Regulars
Join Date: May 2011
Location: Florida
Posts: 232
Default

Quote:
Originally Posted by Harleypingman View Post
Doesn't the '12 SG still have a three position Multilock connector under the left side cover as previous models have? It would be identified as the "tour pak harness" on a wiring diagram and is part of the main wiring harness. Carl
Yes, it's still on left side but only connects run/stop, no signals. I have my king tour pak with led light bar for run/stop/turn.
__________________

1978 Shovelhead rigid/springer, suicide shift, 2" open belt, kickstart (no starter problems here)
2013 Breakout - Big Radius
2012 Street Glide:Rokker 250 amp & 3-way speakers, S & S Headers, V & Hines Twin SLash, 255SE Cams, LED headlight and passing lights, Gator Tail
I rode mine to Daytona since 1976
Reply With Quote
  #10  
Old 10-01-2012, 07:52 PM
botlefedpony botlefedpony is offline
One Of The Regulars
Join Date: Apr 2008
Posts: 137
Default

Quote:
Originally Posted by OWOF View Post
Yes, it's still on left side but only connects run/stop, no signals. I have my king tour pak with led light bar for run/stop/turn.


OWOF I know this is an old post but did you ever get the turn signals working on your tour pack? I am looking to do the same thing.
Reply With Quote
Old 10-01-2012, 07:52 PM
 
 
 
P
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Installed w/ pics--HD Boom Audio Music and Intercom Kit (on '04 Electra Glide) Harleypingman Audio Systems 79 09-07-2014 11:38 AM
ThunderMax w/auto tune P/N 309-360 $450.00 Shipped opencaliber Softail Parts 4 03-19-2012 02:31 PM
3 wire to 5 wire headlight swap (how to, with pictures) XjldX Dyna Glide Models 4 01-02-2012 10:01 AM
Building a Molex Cable Extension Iron_883 Sportster Models 2 08-02-2010 06:48 PM
Molex Connector Problems FACTION95 Softail Models 7 12-04-2008 12:29 PM


Tags
2012, adapter, brake, connection, davidson, dlhx, flhx, harley, harness, light, pak, run, tour, turn, wiring


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Join HDForums

Advertising
Featured Sponsors
Vendor Directory
Sponsors

All times are GMT -5. The time now is 03:39 AM.


Internet Brands, Inc.