Wiring diagram for a 1999 FLH
#1
01-20-2013, 08:43 PM
Wiring diagram for a 1999 FLH
I am trying to help a buddy, he has a 1999 Electra Glide that he is customizing and putting it back together. Now when he turns the ignition on the bike starts to crank over so I think the start button is wired incorrectly, I am hoping someone may have a wiring diagram. Anyone?
Last edited by jay87LX; 01-20-2013 at 08:45 PM.
#2
01-20-2013, 09:24 PM
pull the connector off of the solenoid- is the green wire.
that will keep the bike from cranking- unless the solenoid plunger is jammed.
from there, track the fault backwards- a switch could be shorted, or it may be the starter relay.
hate to sound like a broken record, but the factory shop manual has everything a rider needs to work on their bike.
mike
that will keep the bike from cranking- unless the solenoid plunger is jammed.
from there, track the fault backwards- a switch could be shorted, or it may be the starter relay.
hate to sound like a broken record, but the factory shop manual has everything a rider needs to work on their bike.
mike
#3
01-21-2013, 05:50 AM
pull the connector off of the solenoid- is the green wire.
that will keep the bike from cranking- unless the solenoid plunger is jammed.
from there, track the fault backwards- a switch could be shorted, or it may be the starter relay.
hate to sound like a broken record, but the factory shop manual has everything a rider needs to work on their bike.
mike
that will keep the bike from cranking- unless the solenoid plunger is jammed.
from there, track the fault backwards- a switch could be shorted, or it may be the starter relay.
hate to sound like a broken record, but the factory shop manual has everything a rider needs to work on their bike.
mike
Thread
Thread Starter
Forum
Replies
Last Post
sonicporno
Ignition/Tuner/ECM/Fuel Injection
3
01-11-2008 10:30 PM
Nanaimo Dave
Ignition/Tuner/ECM/Fuel Injection
5
03-07-2006 08:34 PM
