Touring Models Road King, Road King Custom, Road King Classic, Road Glide, Street Glide, Electra Glide, Electra Glide Classic, and Electra Glide Ultra Classic bikes.
Sponsored by:
Sponsored by:

New HO 103 Touring, cam specs.

  #1  
Old 08-25-2013, 08:00 AM
richie's Avatar
richie
richie is offline
Cruiser
Thread Starter
Join Date: May 2007
Location: western mass.
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts
Default New HO 103 Touring, cam specs.

Been reading a lot of posts on the new touring bikes. According to Harley the compression has been increased a bit and there is a new slightly higher lift ,longer duration cam in the new motors. Has anyone seen the specs on this cam , either in a new SE brochure under stock cam comparison or from some technical information posted somewhere in regards to actual numbers , lift , overlap etc for this particular improvement. Thanks.
 
  #2  
Old 08-25-2013, 08:16 AM
NDBadlands4-2's Avatar
NDBadlands4-2
NDBadlands4-2 is offline
Extreme HDF Member
Join Date: Dec 2010
Location: Badlands of ND
Posts: 14,779
Received 66 Likes on 56 Posts
Default

I was a the dealer this week and the said that they have not gotten any literature on the new bikes at all yet.
 
  #3  
Old 08-25-2013, 08:36 AM
sp9997's Avatar
sp9997
sp9997 is offline
Tourer
Join Date: Jul 2009
Location: Carol Stream, IL
Posts: 321
Likes: 0
Received 1 Like on 1 Post
Default

here is more information on the cam timing difference between 2013 and 2014 models.
 
Attached Thumbnails New HO 103 Touring, cam specs.-2014-cam-timing.jpg  

Last edited by sp9997; 08-25-2013 at 08:41 AM.
  #4  
Old 08-25-2013, 10:06 AM
richie's Avatar
richie
richie is offline
Cruiser
Thread Starter
Join Date: May 2007
Location: western mass.
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by psuchit
here is more information on the cam timing difference between 2013 and 2014 models.

Interesting chart, thanks. Where did you find this on the web , looking to see how much lift has changed whether it is above .550 like the 255 cam .
 
  #5  
Old 08-25-2013, 10:23 AM
sp9997's Avatar
sp9997
sp9997 is offline
Tourer
Join Date: Jul 2009
Location: Carol Stream, IL
Posts: 321
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by richie
Interesting chart, thanks. Where did you find this on the web , looking to see how much lift has changed whether it is above .550 like the 255 cam .

There are some written information next to the chart in the above image. There is much more technical information in a slide presentation that one of the forum member posted. I believe that has since taken down being that it was copyright material.
 
  #6  
Old 08-25-2013, 11:20 AM
richie's Avatar
richie
richie is offline
Cruiser
Thread Starter
Join Date: May 2007
Location: western mass.
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts
Default

[QUOTE=psuchit;11684040]There are some written information next to the chart in the above image. There is much more technical information in a slide presentation that one of the forum member posted. I believe that has since taken down being that it was copyright material.[/

I did see that , thanks , the lift info is not there , will continue digging for it . sometimes getting info for Harley is like looking for a needle in a haystack.
 
  #7  
Old 08-25-2013, 12:04 PM
Inspector 12's Avatar
Inspector 12
Inspector 12 is offline
Road Master
Join Date: Nov 2009
Location: Yakima WA
Posts: 1,218
Likes: 0
Received 0 Likes on 0 Posts
Default

The information on the left margin indicates that the 2014 profile is like the SE 255 profile and contributes to the increased torque output in the 2014 models.
 
  #8  
Old 08-25-2013, 01:24 PM
richie's Avatar
richie
richie is offline
Cruiser
Thread Starter
Join Date: May 2007
Location: western mass.
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Inspector 12
The information on the left margin indicates that the 2014 profile is like the SE 255 profile and contributes to the increased torque output in the 2014 models.
I can see all that , thanks, obviously it contributes to torque values, it tells me that also. What I was specifically looking for is a no. indicating the LIFT . Do you by any chance have any info regarding that particular spec.
 
  #9  
Old 08-26-2013, 05:43 AM
roadglider05's Avatar
roadglider05
roadglider05 is offline
Road Master
Join Date: Aug 2009
Location: new york
Posts: 874
Received 79 Likes on 67 Posts
Default

Very interesting cam info, after riding a 14 Street Glide I knew there had to be something besides a .1 increase in compression and air box. The bike pulled well in all gears with no flat spots and corked exhaust. Will probably wait for 15 when the new Road Glide comes out, not quite 40,000 on my 2011 Road Glide Ultra.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WG2011
Engine Mechanical Topics
166
06-04-2018 09:47 PM
WG2011
2014-2023 Touring Models
0
07-21-2015 01:24 PM
RK14SGS
Touring Models
8
01-13-2014 05:23 PM
billz007
Welcome Area Only
10
08-20-2010 01:13 PM
cycleboy1450
Touring Models
1
11-13-2007 06:49 AM


Thread Tools
Search this Thread
Quick Reply: New HO 103 Touring, cam specs.



All times are GMT -5. The time now is 06:35 PM.