EZ Up Center Stand for 08 and back Street Glides
#1
EZ Up Center Stand for 08 and back Street Glides
Model #CS-3-C Chrome EZ UO Center Stand by WheelDock
This model EZ-UP Center stand features our CHROME FOOT LEVER (the remainder of the stand and mount is black epoxy powder coating). This stand fits the 1989-2008 Harley-Davidson touring motorcycles which have been lowered in the FRONT and REAR. This model is 1 inch lower than the stock center stand and fits the factory lowered FLHX Street Glides, FLHRS Road King Customs, and any FL frame which has been lowered in the back with H-D profile shock absorbers and have also been lowered in the front with the H-D lowering spring kits.
Mounts to the frame with two bolts in less than five minutes with a 3/4 inch wrench.
EZ-OFF by simply placing the bike in gear and driving off.
Because the rear tire is not completely off the ground the bike can be driven off of this stand.
By placing a 3/8 inch spacer (such as a piece of plywood) below the stand you will have the rear wheel free of the ground for free rotation and cleaning.
Your tank will hold up to ½ gallon more fuel when parked in the upright position.
http://www.wheeldock.com/catalog/pro...46ae3891f1ff1d
Compare at $289.00 NEW
It is in excellent condition used less than 6 months. It works perfect and the only reason I’m selling it is because I installed a True track and they will not work together.
Easy on and easy off – They work GREAT
You can put a 1/2 inch thick board on the ground under the stand and easily lift the rear wheel off the ground. I use to carry one in the hard bag just in case I got a flat tire.
$145.00 Gets it with FREE SHIPPING
This model EZ-UP Center stand features our CHROME FOOT LEVER (the remainder of the stand and mount is black epoxy powder coating). This stand fits the 1989-2008 Harley-Davidson touring motorcycles which have been lowered in the FRONT and REAR. This model is 1 inch lower than the stock center stand and fits the factory lowered FLHX Street Glides, FLHRS Road King Customs, and any FL frame which has been lowered in the back with H-D profile shock absorbers and have also been lowered in the front with the H-D lowering spring kits.
Mounts to the frame with two bolts in less than five minutes with a 3/4 inch wrench.
EZ-OFF by simply placing the bike in gear and driving off.
Because the rear tire is not completely off the ground the bike can be driven off of this stand.
By placing a 3/8 inch spacer (such as a piece of plywood) below the stand you will have the rear wheel free of the ground for free rotation and cleaning.
Your tank will hold up to ½ gallon more fuel when parked in the upright position.
http://www.wheeldock.com/catalog/pro...46ae3891f1ff1d
Compare at $289.00 NEW
It is in excellent condition used less than 6 months. It works perfect and the only reason I’m selling it is because I installed a True track and they will not work together.
Easy on and easy off – They work GREAT
You can put a 1/2 inch thick board on the ground under the stand and easily lift the rear wheel off the ground. I use to carry one in the hard bag just in case I got a flat tire.
$145.00 Gets it with FREE SHIPPING
Thread
Thread Starter
Forum
Replies
Last Post
StanfordMan
Touring Models
40
11-13-2015 01:44 AM