FS: Roller Rockers, TC88A Ignition, Fat Cat, HSR45, Wood TW-8-6, CNC Heads, SE Lifter
#1
FS: Roller Rockers, TC88A Ignition, Fat Cat, HSR45, Wood TW-8-6, CNC Heads, SE Lifter
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
Details
---------
Daytona Twin Tec TC88A Ignition
TC88A Plug-In Ignition Module for 2003-2006 Carbureted Twin-Cam 88® and Sportster® with Single 12 Pin Connector and 2004-2007 American IronHorse®
These list for $313. I'll let it go for $189 shipped within the continental US. Need the optional USB interface (USB-INTF) in order to program a custom map into the module? I also have this and I'll sell it for $40, regular price is $79.
For more info:
http://www.daytona-twintec.com/TC88A.html
R&R / GMR CNC Ported Heads, 1.710 Intake Port
These are -06 castings CNC ported by R&R and sold by GMR Performance. They have 1.94 intake and 1.635 exhaust, 1.710 intake port runners and Crane springs setup for .590 lift. I don't have flow numbers but they ran great on my 107" setup. Manual compression releases installed. The chambers are 82CCs.
$550 + shipping.
SOLD - Mikuni HSR45 Carburetor
Love these carbs. Had this on a 107" and the response and performance were awesome. Has about 5K miles on it. Jetted pretty close to stock.
SOLD - S&S Intake Manifold, 1.710 Ports for HSR45
Need a manifold for that HSR45 above? Nice S&S manifold for Twin Cam heads with 1.710 intake runner size and spigot that fits the HSR45 or CV44 carbs.
SOLD - Roller Rockers
These are chinese made roller rockers that are in great shape. Ran them in my 107" for about 8K miles. They look great and the rollers in in excellent shape.
D&D Fat Cat, Chrome, Big Bore Quiet Baffle
D&D Fat Cat, chrome, big bore quiet baffle (also known as performance wrapped baffle), with O2 sensor bungs. Fits 2007-2008 FLH Touring Models (Street Glide, Electra Glide, Road King, Road Glide, etc)
$430 + shipping.
Pingel Fuel Valve, Round, Chrome
Model 1311-CR, Round, Chrome, left side, forward facing inlet. Used it on a 2007 Street Glide that was converted to carb. Should work on just about any similar configuration. Very nice valve and over $100 new.
$50 shipped within the continental US.
Wood TW-8-6 Cams
Bob Wood TW-8-6 chain drive cams. Used for about 5K miles and in great shape. Fit 2006 and up Dyna, 2007 and Up all other twin cams.
$200
New Screamin Eagle Lifters
Brand spankin' new from a new 120R motor, never run.
$200
HogTunes Speakers
These are the older version (about 5 years) that fit 2006 and newer fairing equipped bikes (other than Road Glide). Great shape.
$50
Last edited by VDeuce; 06-27-2012 at 09:31 AM.
#2
Thread
Thread Starter
Forum
Replies
Last Post
ntraindavefl
Multi-Fit Parts and Accessories
9
09-03-2016 08:35 AM