Can anyone tell what pullies I have 32 or 30 on front 6th gear on the level 60 mph at 2,500 rpm. I'm just wondering it seems the longer I use 360 additive smoother ole Shiney runs. ride safely fearless

 

Sounds like a 30 to me. What year is your trike?

 

According to my math...my Trike in 6th gear, at 60MPH...is revving 2,483 RPMs. My 2012 gear train is stock. So... Whatever was stock in 2012 sounds dang close to your's.

 

I do believe you have a 30. Our freewheeler has the 30 tooth on front, 60 mph @ 2,480 rpm's

 

IF your trike is stock, you have a 32. '09, and '10 trikes came with a 32 tooth sprocket. They changed it to a 30 in '11. Take a look at the 'sticky threads', young Mike (msocko3) did a great article on changing the gear.


With the 32 you get a tad more top end and a smidge better gas mileage. The 30 gives you miniscule better acceleration and better use of 6th gear. It is a toss up. For years I rode an '09, wife had an '11. Really didn't make that much difference.

 

Well old shiney and I have a short history on what has been done as far as improvements. I got her used and now that I have added a few things it sure is running a lot better I just became curious about gearing. thanks for the replys I really appreciate them.

 

Well I believe I'm back to square one it seems there is a five MPH difference between GPS and speedometer is five MPH slow. So now where is the gearing sounds like I still have a thirty two tooth cog on front? This winter I will paint one tooth and count thanks all opinions appreciated. 6th gear at 65 MPH 2500 RPMs

 

32 tooth front.
My cvo turned 2,800 rpms at 80 mph with a front 32 tooth sprocket.

 

I have a '10 FLHXXX that had a 32 tooth gear
I had it change to a 30 tooth and my speedo is 6mph off.
The speedo reads 60mph, the trike is running 54 mph.
The up grade was worth it, more get-up and go.