WTB Screamin Eagle Heavy Breather 29098-09 and Teardrop Filter Cover 29400061
#1
#4
Here are four pics. The only thing missing is you will need to get two O-rings for the breather caps. I have two that are brand new (and must have pilfered two from the service kit).
The three tapered chrome hex screws for the mounting ring are a bit chewed where you insert the 5/32 hex key, but are not stripped out. The hex key will seat all the way in.
On the back side of the breather caps they are nicked a bit from being pried out, but you can't see that when they are pushed in.
I would say that over all, the chrome is 95%. If you pm me your email, I will send you these and a few more detailed pictures that show the caps and a close up of the hex screws. I'll pm you the price I'm asking.
The three tapered chrome hex screws for the mounting ring are a bit chewed where you insert the 5/32 hex key, but are not stripped out. The hex key will seat all the way in.
On the back side of the breather caps they are nicked a bit from being pried out, but you can't see that when they are pushed in.
I would say that over all, the chrome is 95%. If you pm me your email, I will send you these and a few more detailed pictures that show the caps and a close up of the hex screws. I'll pm you the price I'm asking.
#7
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
machm1969
Want To Buy Motorcycles/Parts/Accessories
3
03-23-2015 07:38 AM
MK1200C
Want To Buy Motorcycles/Parts/Accessories
0
11-25-2011 06:31 PM