Harley Davidson Forum

Removing Stock Shifter Pegs

  Printable Version
Harley Davidson Forum >> Do It Yourself Help Forum >> Chassis, Suspension, Brakes, and Front End/Controls >> Removing Stock Shifter Pegs Page: [1]
Login
Message << Older Topic   Newer Topic >>
Removing Stock Shifter Pegs - 11/2/2005 8:39:36 AM   
HDF Tech

 

Posts: 14559
Joined: 5/14/2005
Status: offline
HDF Tech's photo gallery

It seems there are quite a few of us hacking away at the stock shifter pegs to replace them with a custom peg.

They are usually destroyed beyond recognition when they are removed.

The simple way to remove them is to heat the end of the shift arm where the peg screws into it with a benzomatic torch. It softens the lock tite that the factory puts on them and the peg can be unscrewed without much trouble at all.
Post #: 1
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Harley Davidson Forum >> Do It Yourself Help Forum >> Chassis, Suspension, Brakes, and Front End/Controls
Jump to:



Featured Sponsors
Advertising Info

New Vendors
Warehouse Direc
Baker Drive Train
Haulen Ass
Pickard USA
Harley Goodies
Pickard USA
AMSOIL - Performance Oil Technology
HDForums.com Sponsors
AMSOIL - Performance Oil Technology
Fix My Hog

HDForums.com is not affiliated with or endorsed by Harley Davidson, Inc.