Harley Davidson Forum

RE: The Deuce Picture Thread

  Printable Version
Harley Davidson Forum >> Harley Davidson Motorcycles >> Motorcycle Pictures By Model >> Softail Pictures >> RE: The Deuce Picture Thread Page: <<   < prev  74 75 [76] 77 78   next >   >>
Login
Message << Older Topic   Newer Topic >>
RE: The Deuce Picture Thread - 3/19/2008 5:08:05 PM   
tutiii


Posts: 38
Joined: 9/10/2007
Status: offline
deuce,
so i finally picked up the flush caps.  i had the ones for the touring in my hand and i was looking at the softtail.  i was reading the directions and realize that there is only 3 wires (no gray) so the changed the softail version.  i also ordered  the trim ring for the rocker.  but since i can't wait for anything.  i put them on tonight.  they look great. and the low fuel light went out.  so i figure i'll hold on to the rocker trim ring never know.  when i can find the camera i'll take pictures.  thanks again for your help.

(in reply to Deuce Bigelow)
Post #: 3001
RE: The Deuce Picture Thread - 3/19/2008 6:03:57 PM   
Deuce Bigelow


Posts: 748
Joined: 10/9/2006
From: South Jersey, AC area
Status: offline
Deuce Bigelow's photo gallery
so you're saying that you installed the softail version??

can't wait to see them, take some pics!

_____________________________

2007 FXSTSSE "Canyon Copper"
ThunderMax ECM w/ Autotune!


"Wind in the Hair, Lead IN the pencil!"

(in reply to tutiii)
Post #: 3002
RE: The Deuce Picture Thread - 3/20/2008 4:18:15 AM   
tutiii


Posts: 38
Joined: 9/10/2007
Status: offline
yes, the softtail version.  7 blue lights and a gas pump in the center

(in reply to tutiii)
Post #: 3003
RE: The Deuce Picture Thread - 3/20/2008 4:51:41 AM   
Deuce Bigelow


Posts: 748
Joined: 10/9/2006
From: South Jersey, AC area
Status: offline
Deuce Bigelow's photo gallery
oh, ok...

they decided to use the "touring" version gauge in everything.

good choice!

take some pics when you get the rocker trim ring.

_____________________________

2007 FXSTSSE "Canyon Copper"
ThunderMax ECM w/ Autotune!


"Wind in the Hair, Lead IN the pencil!"

(in reply to tutiii)
Post #: 3004
RE: The Deuce Picture Thread - 3/23/2008 6:44:42 PM   
delldoe

 

Posts: 19
Joined: 8/15/2007
Status: offline
delldoe's photo gallery
here is my 02 duece



Attachment (1)

< Message edited by delldoe -- 3/23/2008 7:02:38 PM >

(in reply to tutiii)
Post #: 3005
RE: The Deuce Picture Thread - 3/23/2008 9:00:37 PM   
BoneCrusher


Posts: 965
Joined: 2/25/2007
From: Pittsburgh, PA
Status: offline
Wow dell nice job man.  I love the pipes and the rear wheel.  Nice ride.

_____________________________

2007 Black Pearl Deuce



2003 Mustang Cobra
11.69 @ 121MPH

(in reply to delldoe)
Post #: 3006
RE: The Deuce Picture Thread - 3/24/2008 12:51:34 PM   
lobo0101


Posts: 326
Joined: 2/20/2007
Status: offline
lobo0101's photo gallery
nice hellbents dell. did you modify that seat yourself?

_____________________________


(in reply to BoneCrusher)
Post #: 3007
RE: The Deuce Picture Thread - 3/24/2008 4:53:33 PM   
SuperJoe

 

Posts: 34
Joined: 3/5/2008
Status: offline

Well guys, this is NOT my exact bike but a pic of one I almost bought.  The only things different on mine is mine has carlini super sweeps, bar mounted signals, and chrome inner.  Plus this lucky sob's in florida, Im in North Dakota therefor mines still under cover in the garage.
2004 SE deuce, V&H big shot staggered, SE cone air cleaner, carlini bars, side mount plate, Race tuner, billet headlight

Some BEAUTIFUL deuces on here!  The rocker can kiss my ass!!

Joe

(in reply to lobo0101)
Post #: 3008
RE: The Deuce Picture Thread - 3/24/2008 9:17:54 PM   
delldoe

 

Posts: 19
Joined: 8/15/2007
Status: offline
delldoe's photo gallery
it is a custom molded fiberglass pan when it was done some of the fiberglass ran down through the newspaper and was a pain to clean off but i got most of it under control now. 

(in reply to SuperJoe)
Post #: 3009
RE: The Deuce Picture Thread - 3/25/2008 10:08:46 AM   
lobo0101


Posts: 326
Joined: 2/20/2007
Status: offline
lobo0101's photo gallery
Welcome Super Joe. I've always liked that paint scheme on the '04 SE model. Shouldn't be too much longer 'till you're riding again.


_____________________________


(in reply to delldoe)
Post #: 3010
RE: The Deuce Picture Thread - 3/25/2008 7:06:05 PM   
SuperJoe

 

Posts: 34
Joined: 3/5/2008
Status: offline
Thanks Lobo.  Ive always really liked this and the yellow.  My buddys got the yellow version so the blue was the only option (not that Im disappointed).  Im looking at doing a set of martin pipes like yours.  Do you have pics of more angles of the pipes on?


(in reply to lobo0101)
Post #: 3011
RE: Deuce Pictures - 3/26/2008 1:02:31 AM   
darkman


Posts: 2292
Joined: 12/21/2007
From: My Mother
Status: offline
darkman's photo gallery
quote:

ORIGINAL: Deuce Bigelow

Thanks!


Thanks for your support buddy! It means a lot to me. This is my first HD n I owe a huge amount to you guy's ( HDF) who over the time I have been here have inspired me n made me laugh, I declined the offer as there is still a lot of detail work to do on the bike n detail is the devil!!. I do all my own mechanical n paint n as you guy's know it takes a long time, hell I have only got a few months on this bike n I just wanna get out n ride it!!

_____________________________

Darkman. Your Minister Of International Affairs.
833-HCC

(in reply to Deuce Bigelow)
Post #: 3012
RE: Deuce Pictures - 3/26/2008 12:50:07 PM   
mt325



Posts: 147
Joined: 8/20/2007
From: Dirty Jerzey
Status: offline
mt325's photo gallery
Finally took a recent pic in sig, it's 60 here in Jersey and had to dust her off.  Funds dried up already this year in regards to mods, just going to do some small ones this year and have to wait till winter for the next big work.  Going with the Heartland 200 kit, spoke rims with crome spokes and powder coated rim, new front fender which I am still researching, looking to move brake to the left side and integrate with the drive, then onto paint.  I am tossing around a few ideas with ghosting images.  If anyone has a few grand extra laying around to assit in my mods, let me know and will be more then happy to take it off your hands.  Just a thought.

_____________________________


(in reply to darkman)
Post #: 3013
RE: Deuce Pictures - 3/26/2008 3:20:21 PM   
06DEUCE

 

Posts: 527
Joined: 9/27/2005
From: IN
Status: offline
06DEUCE's photo gallery
new pics


Thumbnail Image


Attachment (1)

_____________________________

06 DEUCE Cobalt blue. porker perf pipes, stg 1 kit, SERT, HD billet tach. SE 180. 08 fatbob dual headlight
[image] [/image]

(in reply to mt325)
Post #: 3014
RE: Deuce Pictures - 3/26/2008 3:21:40 PM   
06DEUCE

 

Posts: 527
Joined: 9/27/2005
From: IN
Status: offline
06DEUCE's photo gallery
RWD front fender


Thumbnail Image


Attachment (1)

_____________________________

06 DEUCE Cobalt blue. porker perf pipes, stg 1 kit, SERT, HD billet tach. SE 180. 08 fatbob dual headlight
[image] [/image]

(in reply to 06DEUCE)
Post #: 3015
RE: Deuce Pictures - 3/26/2008 3:23:39 PM   
06DEUCE

 

Posts: 527
Joined: 9/27/2005
From: IN
Status: offline
06DEUCE's photo gallery
winter mods....  new front fender,  lowering kit, mirrors, clutch cable...


ready for warm weather !!!!!!!!!!!!


Thumbnail Image


Attachment (1)

_____________________________

06 DEUCE Cobalt blue. porker perf pipes, stg 1 kit, SERT, HD billet tach. SE 180. 08 fatbob dual headlight
[image] [/image]

(in reply to 06DEUCE)
Post #: 3016
RE: Deuce Pictures - 3/28/2008 10:05:59 AM   
baccalasports


Posts: 45
Joined: 8/24/2007
Status: offline
baccalasports's photo gallery
Looking very nice, I like that blue...
What brand of fender did you use on the front....
the stock Harley fender SUCKS...It doesn't cover the tire enough, but I have a factory orange/green   flip flop color and don't think I can get it painted to match the rest of the tins...ciao Enzo

(in reply to 06DEUCE)
Post #: 3017
RE: Deuce Pictures - 3/28/2008 10:11:31 AM   
06DEUCE

 

Posts: 527
Joined: 9/27/2005
From: IN
Status: offline
06DEUCE's photo gallery
this the brand fender

http://www.russwernimont.com/store/index.php?cPath=1_25&osCsid=3e42c845d045c1abc30eb73b3f96a947


_____________________________

06 DEUCE Cobalt blue. porker perf pipes, stg 1 kit, SERT, HD billet tach. SE 180. 08 fatbob dual headlight
[image] [/image]

(in reply to baccalasports)
Post #: 3018
RE: Deuce Pictures - 3/29/2008 7:52:16 PM   
SFTL 1

 

Posts: 3
Joined: 3/29/2008
Status: offline
My 04' Deuce with a lot of stuff...




Thumbnail Image



Thumbnail Image


Attachment (2)

_____________________________

04' Deuce
95" w/HTCC 10.5:1
SE 257, HTCC Heads & Intake
V&H BR 2-1
Baisley Spring, Mobil-1 Oils & K&N Filters

(in reply to 06DEUCE)
Post #: 3019
RE: Deuce Pictures - 3/30/2008 2:46:58 PM   
TxDeuce


Posts: 133
Joined: 11/26/2007
Status: offline
Well the only mod that I've got to complete is adding a side mount license plate.  Got a Kuryaken on order that should be in any day.  It's been great reading about everyone else's work.  Note the new flush mount gage and pop up tank just put on!  In case anyone is interested, this is the set that is for the 08 Rocker.




_____________________________

Texas Born Living The H-D Dream


(in reply to DriBak)
Post #: 3020
RE: Deuce Pictures - 3/30/2008 4:48:35 PM   
gobby


Posts: 490
Joined: 3/6/2006
Status: offline
quote:

ORIGINAL: Groundpouner03

2001 Deuce


Thumbnail Image



What kind of seat is that brother??


(in reply to Groundpouner03)
Post #: 3021
RE: Deuce Pictures - 3/30/2008 5:02:07 PM   
TxDeuce


Posts: 133
Joined: 11/26/2007
Status: offline
Corbin Hollywood Solo.  It's taken about 2000 miles but it's now starting to really get comfy.  Did a 300 mile ride the other day and didn't have much of a comfort problem.

_____________________________

Texas Born Living The H-D Dream


(in reply to gobby)
Post #: 3022
RE: Deuce Pictures - 3/31/2008 10:16:20 AM   
lobo0101


Posts: 326
Joined: 2/20/2007
Status: offline
lobo0101's photo gallery
if any of you guys are into 80's rock....check this out: www.southtexasrockfest.com look at the list of bands to perform. it's being held at javelina harley davidson just north of san antonio. nothing like some good music and hill country riding!!

_____________________________


(in reply to TxDeuce)
Post #: 3023
RE: Deuce Pictures - 3/31/2008 10:34:17 AM   
baccalasports


Posts: 45
Joined: 8/24/2007
Status: offline
baccalasports's photo gallery
Really nice touch with the guages, I have a 2001 deuce and it seems these are all for 2004 and up is there a difference in the tanks from year to year or will it work on my bike also...Thanks

(in reply to TxDeuce)
Post #: 3024
RE: Deuce Pictures - 4/1/2008 12:40:32 AM   
ratsmow


Posts: 108
Joined: 11/7/2006
Status: offline
TX deuce did you have any dramas fitting those flush mount fittings. That has been a topic of discussion on here recently whether the rocker ones went straight in. Was the wiring for the fuel gauge a problem, cheers Rats. Nice ride by the way.

_____________________________

2006 Deuce
Burleigh Bars
Crane Cams
V&H Fuel Pak

(in reply to baccalasports)
Post #: 3025
RE: Deuce Pictures - 4/1/2008 2:50:36 AM   
TxDeuce


Posts: 133
Joined: 11/26/2007
Status: offline
No drama and wiring was straight forward.  Instructions are pretty good explaining how to get beauty ring to fit tank.  I will say that LEDs are no more accurate than the analog gage.  Pretty much have to use odometer to determine when to fill up but the overall look is well worth it.

_____________________________

Texas Born Living The H-D Dream


(in reply to ratsmow)
Post #: 3026
RE: Deuce Pictures - 4/1/2008 10:38:28 AM   
baccalasports


Posts: 45
Joined: 8/24/2007
Status: offline
baccalasports's photo gallery
do  you know if it will fit on carb deuce or just EFI, how many wires are there...Thanks

(in reply to TxDeuce)
Post #: 3027
RE: Deuce Pictures - 4/1/2008 11:46:20 AM   
tutiii


Posts: 38
Joined: 9/10/2007
Status: offline
I just installed them on my 05, no difference in EFI or Carb.  Took less then a hour.


(in reply to baccalasports)
Post #: 3028
RE: Deuce Pictures - 4/1/2008 1:24:37 PM   
baccalasports


Posts: 45
Joined: 8/24/2007
Status: offline
baccalasports's photo gallery
thanks, didn't want to put out the money and find out later they only fit EFI...
and then they wouldn't take it back because it's an electrical item...
So these are ones for a 2008 Rocker that I need to order, nothing else is needed...

(in reply to tutiii)
Post #: 3029
RE: Deuce Pictures - 4/1/2008 6:39:40 PM   
TxDeuce


Posts: 133
Joined: 11/26/2007
Status: offline
Correct!

_____________________________

Texas Born Living The H-D Dream


(in reply to baccalasports)
Post #: 3030
RE: Deuce Pictures - 4/1/2008 6:40:47 PM   
snakeinthegrass

 

Posts: 189
Joined: 6/1/2007
Status: offline
My 2004 Deuce.


Thumbnail Image


Attachment (1)

< Message edited by snakeinthegrass -- 4/3/2008 2:15:11 PM >


_____________________________

pg[/img]

(in reply to DriBak)
Post #: 3031
RE: Deuce Pictures - 4/3/2008 3:08:44 PM   
snakeinthegrass

 

Posts: 189
Joined: 6/1/2007
Status: offline
Sorry for posting again but I went through the process of adding my signature photo and I need to see if it works.

Well so much for that.  I must be doing something wrong.   Darn, now I am doing something right. Hoo Rah

< Message edited by snakeinthegrass -- 4/4/2008 3:06:10 AM >


_____________________________

pg[/img]

(in reply to snakeinthegrass)
Post #: 3032
RE: Deuce Pictures - 4/3/2008 5:53:35 PM   
FXSTD.AU

 

Posts: 163
Joined: 10/30/2006
From: Melbourne, Australia
Status: offline
FXSTD.AU's photo gallery
quote:

ORIGINAL: TxDeuce

....  Note the new flush mount gage and pop up tank just put on!  In case anyone is interested, this is the set that is for the 08 Rocker.





Stoked to see this photo - have wanted the flush mount caps for my 07 but held off as to date there were concerns with fit and water. How would have thought the moco would add a Deuce accessory!! Nice colours too TX.

Can you confirm the part number as 62811-08?


_____________________________

2007 Softail Deuce


(in reply to TxDeuce)
Post #: 3033
RE: Deuce Pictures - 4/3/2008 7:18:14 PM   
TxDeuce


Posts: 133
Joined: 11/26/2007
Status: offline
Correct part number.  Thanks.

_____________________________

Texas Born Living The H-D Dream


(in reply to FXSTD.AU)