Post which map you are running with your PCIII or SERT and Mod's
Login  | |
|
|
|
|
|
RE: Post which map you are running in your PCIII and Mod's - 1/12/2006 10:39:57 PM
|
|
|
kf4wsn
Posts: 2
Joined: 1/12/2006
Status: offline
|
Has anyone tried the Thundermax EFI? it is from Zippers and it is supose to be the latest and greatest on the market who can tell me more about it.
|
|
|
|
|
RE: Post which map you are running in your PCIII and Mod's - 1/12/2006 10:57:04 PM
|
|
|
myzen
Posts: 727
Joined: 10/7/2005
From: Tulsa, Ok
Status: offline
|
I am running 807-164 (2005 with Rush pipes 2.5 baffle, SE Air Cleaner, and Stage 1 ECM) I sent an email to Dynojet and the suggested the 807-213 but it popped on decel and didn't seem right. The 807-164 is better in my opinion. I plan on having it dynoed this spring. My mods are
Stage 1 download, SE air cleaner, and V&H Basic Slip-on pipes on an 06 Roadglide.
|
|
|
|
|
RE: Post which map you are running in your PCIII and Mod's - 1/15/2006 7:42:25 PM
|
|
|
Nomad2day
Posts: 172
Joined: 11/7/2005
Status: offline
|
I have a 06 RK Custom with SE air cleaner, SE slip ons and a stage 1 download. I had been running the M807-152 map but have chaanged over to the M807-159 which is for 2005 Harley Davidson Touring Model Samson rolled oval slip-ons ,Screamin Eagle air filter, Stage 1 ECM. Bike runs good.
Today I download the Free Accelerator pump program from the Power commander site and loaded it into my PCIII USB. Pretty cool piece of software. Alows you to set your throttle response to fuel to take out any hesitation. It is only available for the USB model PCIII
Neil
http://www.powercommander.com/accelpump.shtml
_____________________________
Laid back in TN
06 RK Custom
SE Air box, SE slip ons
SERT cal#55
|
|
|
|
|
RE: Post which map you are running in your PCIII and Mod's - 2/1/2006 8:30:49 PM
|
|
|
KingTom05
Posts: 31
Joined: 3/19/2005
Status: offline
|
I put on my SE mufflers and ac kit. WOW. I programmed my pcIII to that and I was wondering is that enough for now, I mean to not damge the engine?
Thumbnail Image
 Attachment (1)
|
|
|
|
|
RE: Post which map you are running in your PCIII and Mod's - 2/8/2006 12:20:39 PM
|
|
|
bodyman0
Posts: 88
Joined: 11/12/2005
Status: offline
|
06 street bob - power commander usb, se a/c, se slash cut down mufflers w/out baffles and 811-004 map.
|
|
|
|
|
RE: Post which map you are running in your PCIII and Mod's - 3/4/2006 10:37:20 PM
|
|
|
fatheadonsoftail
Posts: 61
Joined: 3/4/2006
Status: offline
|
02 FLSTC
M805-132
2001-2002 Softail
Vance & Hines Bigshot Staggereds with baffles
(V&H part number 17907)
Screamin Eagle air filter
Stage 1 ECM
Just installed all this stuff and have not rode it yet,(Winter), But iT sure idles nice and has a good throttle crack!
|
|
|
|
|
RE: Post which map you are running in your PCIII and Mod's - 3/10/2006 8:34:45 PM
|
|
|
fatheadonsoftail
Posts: 61
Joined: 3/4/2006
Status: offline
|
Update:
I just calibrated the throtlle and now it is running way to rich at idle and when I crack open the trhottle. I only let it run a few minutes. Am going to try to take it for a spin tommorow and I hope it clears up when the engine gets warm
|
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 3/12/2006 7:16:09 PM
|
|
|
wideglide06
Posts: 42
Joined: 1/21/2006
Status: offline
|
I am using map 141NX104 within the HD SERT Rev E. The bike has some minimal surging at approximately 1500-2000 RPM, otherwise it starts and runs fine. I am re-reading the SERT manual so I can figure what changes are needed to the base line to correct the surging.
If anyone has a SERT map available for my configuration, please help. Thanks!
2006 Wide Glide
25 Degree Fuel Injector
SE A/C
Python Staggered Exhaust
|
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 3/14/2006 9:44:43 AM
|
|
|
skullyface
Posts: 59
Joined: 3/10/2006
Status: offline
|
2006 FXDBI (Street Bob)
SE II Slip ons
SE Aircleaner/filter
Stage 1 ECM
i run 89 octane
------------------------------------
I've tried several maps, but i'm currently running a modified version of M810-036 until I have the $$$ to get it dyno-tuned.
|
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 3/14/2006 12:34:57 PM
|
|
|
Reece
Posts: 25
Joined: 3/13/2006
Status: offline
|
currently running map # 807- 162 as per dynojet..... also using the pump accelerator feature i think that it may be running a little rich with this map. i pulled the plugs and they look kinda black & sooty.... bike only has about 3800 miles the following is my setup
05 classic
wildpigs slipon's 1 3/4" baffles
ness big sucker a/c
stock ecm
pc111 usb
|
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 4/10/2006 1:55:44 PM
|
|
|
dashiell
Posts: 53
Joined: 11/19/2005
Status: offline
|
06 Flstci
SE Air Kit w/K&N Air Filter open with a chrome smoothie end cover
SE II Pro Slip-ons
25 Degree Fuel Injectors
Sert 141NP001 w/3.91 Tuning Constant
_____________________________
Dash
"Vincit Qui Patitur"
2006 FLSTCI
SE AC
SE II Slip Ons
|
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 4/19/2006 1:34:26 PM
|
|
|
aldobrow
Posts: 3
Joined: 4/19/2006
Status: offline
|
I have a 2006 street glide and I am running the bassini slip ons with SE air filter and stock ecm any suggestions on what map to use also I started at a stock configuration and got a check engine code ??
_____________________________
allen j dobrowolski
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 4/19/2006 1:54:39 PM
|
|
|
aldobrow
Posts: 3
Joined: 4/19/2006
Status: offline
|
I forgot to add that on the 2006 street glide Im running the pcIII commandor module
_____________________________
allen j dobrowolski
|
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 4/20/2006 10:50:13 AM
|
|
|
Tarzan
Posts: 1
Joined: 4/20/2006
Status: offline
|
I would like to find more SERT maps,too. I am just in the ball park with my combination of mods to the motor . 04 Deuce . 95 flat tops , 039 headquarters cams s&s gear drive , Shortblock Charlies-Scottsman heads , roller rocker . a few different pipes . tech lussion box and 51 mil throttle body with intake . anyone got some maps not in the list on the race tuner software I can try before I go dyno. thanks
|
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 5/4/2006 8:16:09 AM
|
|
|
maineultraclassic
Posts: 2794
Joined: 3/22/2006
From: Southern Maine
Status: offline
|
I am running the Dynojet Canned map 807-167 right now, and I'll bet getting to a dyno sometime this month to see if anything needs to be changed.
'05 Touring
stock motor
stock ecm
Ness Big Sucker
Thunderheader 2-1
PCIIIusb
It runs great now, no hesitation, no loading up, and the milage is around 40 mpg. I just want to make sure I have a good AFR and see if anything can be tweaked to make any more power.
Steve
_____________________________
|
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 5/4/2006 4:58:45 PM
|
|
|
JRFLHR
Posts: 138
Joined: 5/3/2006
Status: offline
|
I'm using 807-173 and have big sucker and an ST with 7 disks and an open end cap.
Haven't dynoed yet waiting for more, like a geared cam and who knows. A zippers kit or Gmr 98 inch.
But will have to wait for winter now!Its 80 out there!
|
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 5/27/2006 11:46:29 PM
|
|
|
Nomad2day
Posts: 172
Joined: 11/7/2005
Status: offline
|
I have ditched the PCIII and purchased a SERT instead due to slow starting with the PCIII on my 06 RK Custom.
I am running calibration #55 with a stage 1 A/C and SE slip on mufflers. The bike is running awesome.
I am going to install so true duals soon.
Neil
_____________________________
Laid back in TN
06 RK Custom
SE Air box, SE slip ons
SERT cal#55
|
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 6/8/2006 7:30:45 PM
|
|
|
ThudMeister
Posts: 2867
Joined: 10/26/2005
From: Escondido, Ca.
Status: offline
|
quote:
ORIGINAL: dashiell
06 Flstci
SE Air Kit w/K&N Air Filter open with a chrome smoothie end cover
SE II Pro Slip-ons
25 Degree Fuel Injectors
Sert 141NP001 w/3.91 Tuning Constant
Amazing. This map is not even listed in the latest SERT manual in section 9 but it is on the disk. This is the best map I have tried so far.
2006 Softail Deuce FXSTDI
K&N Air Cleaner
V&H Big Radius pipes
8 deg injectors (part number 27625-06)
|
|
|
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 6/10/2006 10:24:43 PM
|
|
|
DeathWind
Posts: 244
Joined: 4/1/2006
Status: offline
|
2006 FLTRI with the following mods
SE II slip-ons
Vance & Hines Dresser Duals
SE air Cleaner
Stage 1 ECM
PCIII usb
The SE IIs are now a lot louder and in stereo.
I was running a modified version of the M807-180. Bubbas1 Map
24 June 2006 - After putting a couple tanks of gas in and getting crappy mpg (31-32mpg), I talked to the PC techs and switched to the M807-036 map. I had to modify it a little to tune out the decel popping, but so far the bike is running a little stronger and city mpg is better (36mpg) so cruising mpg should be better. Thinking about ditching the SE II slip-ons and going with the Hooker Tuned flow exhaust. I had Hooker stepped tuned pipes on my 2001 Dyna and loved the sound and increased power. Anyone have the Hooker Tuned flow slip-ons? and what are you thoughts about them?
< Message edited by DeathWind -- 6/24/2006 10:22:23 AM >
|
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 6/14/2006 11:19:06 PM
|
|
|
fiugzel
Posts: 101
Joined: 2/28/2006
From: Metuchen, NJ
Status: offline
|
2006 Deluxe
SE Stage 1 kit (p/n 29773-02B)
Samson Big Guns III Cannons (p/n S-801)
SERT version E (p/n 32107-01E)
Calibration #53 file name 141NQ003-A0.MT6
I opened the file and in advanced mode I lowered the AFR in every cell by two units. Then I saved the file as -A1 and uploaded to deluxe. Works great.
click for a larger view of AFR page
_____________________________
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 6/22/2006 9:58:06 AM
|
|
|
06copbike
Posts: 14
Joined: 10/23/2005
Status: offline
|
Hello I have a 2006 Heritage Softail Classic EFI. I just bought a used set of screaming eagle 2 slash cuts and a new Arlen Ness stage 1 filter kit (similar to H-D's I guess but was only 89.00). I have 4700 miles on the bike. I called the dealer they said I could run the pipes with no computer download but not to put the air cleaner kit on until I had the download. I am confused as to what to get. I ride the bike frequently to work which is a 80 mile round trip at 70-75 mph. the bike is not abused (raced or burnouts) just want to get the best bang for the buck and I know you guys can help. looking for personal endorsements as everyone says their stuff is the best.
Thanks
Robert
_____________________________
Fast is fine
Accuracy is final
Wyatt Earp
Deputy US Marshal
|
|
|
|
|
RE: Post which map you are running with your PCIII or S... - 6/25/2006 8:22:48 AM
|
|
|
T Tommyt
Posts: 1588
Joined: 7/27/2005
Status: offline
|
I reprogrammed the PCIII to Map ## 805-212
I did the fuel pump feature also
happy with the job BIKE runs great
06 FLSTC
_____________________________
Hey Rocky, watch me pull a rabbit out of my hat!
ROARRRR!
opps Wrong hat.
YES THIS ONE LIVES IN FL.
My freezer is a wildlife preserve.
|
|
|
|
|
Printable Version
