I did a search and found a few pics, but I'd like to see pics of FXD's with 4 over and 6 over tubes all in one thread, I want something subtle for mine and cant decide.

__________________
"It seems to take no time at all, A momentary lapse of reason that binds a life for life"

You might notise you are gonna make yer bike top heavy and might not like the end results. Put a taller rim on front.
When you raise yer bike up you are gonna also notise its a lot harder to handle if you don't have it raked. I would consult a custom builder and do yer homework before you do it.

__________________
[sigpic]http://www.i171.photobucket.com/albums/u300/cardboard56/P4280830.jpg[sigpic]
08 FLHT
TW6-6 Woods cams.

Thanks, I understand the rake/trail issue, Stock trail is 4.7", with4 over itwould be within the normally accepted range.
I'm 6'6" tall so I could handle the extra height.
I know there are several on this board that have the plain ole extended and I just wanta see the Pics

__________________
"It seems to take no time at all, A momentary lapse of reason that binds a life for life"

I'm 6'5" so I know where your coming from. I like mine extended 4" without a rake. I've had extended front ends from 6" to 21" on other bikes. Too hard to corner with the longer ones. 4" gives me a little more ground clearance so I don't bottom out on speedbumps.

__________________
2004 Dyna SuperGlide FXDI
http://i177.photobucket.com/albums/w.../NewTach02.jpg

Thanks to all that posted....I went with a AME Wide Glide 14 degree 8 inchover kit.
It was easy to install and I love the results.


[IMG]local://upfiles/42546/9D23EDDDD8E94791BA43910D2D872483.jpg[/IMG]

[IMG]local://upfiles/42546/99338A2D3DAD4A41B8D1B017708AF36C.jpg[/IMG]

[IMG]local://upfiles/42546/D8089643061F454E95280162D92EADB3.jpg[/IMG]

__________________
"It seems to take no time at all, A momentary lapse of reason that binds a life for life"

It looks great!! How does it handle all around??

DougJ

[quote]ORIGINAL: Slipstrm

Thanks to all that posted....I went with a AME 14 degree 8 over kit.
It was easy to install and I love the results.

slipstrm, I read that you love the ride, can you expound a little. I likey

Whoa - that's sure puttin' it out there! If I did that I doubt I could fit it in my garage!

Slipstrm, how wide are your turns now?

__________________

Rides very good, turns feel normal, although it takes more area to turn it around in.
Handles better than stock, it always felt short and stubby before, give about a 1 inch lift in the front (handlebars and tank height)
I'm tall so thats a bonus, wheel base is 77 inches, originally it was 64.2 inches.

__________________
"It seems to take no time at all, A momentary lapse of reason that binds a life for life"

double post....

__________________
"It seems to take no time at all, A momentary lapse of reason that binds a life for life"