I bought one from him this morning and have the Fed-Ex tracking # already.
Seems Harley is really goofed up right now, something happed at their warehouse early in the month, i'm told they had a snafu during a warehouse move. At any rate the word on the street is mid April. However, the backorders apparently are being filled a few at a time. M&M said they were told mid april a week ago Tuesday and receievd 10 the next day. They sold the last 2 Sunday. Yesterday they received 3 and I got one this morning. The other 2 went gone by 8AM.
I had inquiries in to East Coast, Zanotti and Chicago Harley. East Coast responded:
SORRY I DO NOT HAVE THAT
THANKS, JONATHAN
EASTERN PERFORMANCE CYCLES
Zanotti and Chicago have yet to respond.
M&M was back to me in minutes and I placed my order and yes it is the 32107-01E. $367.96 + 16.95 shipping.
These are a hot commodity and will go fast so I'd recommend you try to stay in contact with Zanotti Motors and M&M as they are the only two that are talking about the "E".
Best I can tell you
GOOD LUCK
Bob
__________________
09 FLHTCUSE
Stock and very sweet
If it wasn't for bad luck, I wouldn't have any luck at all.
Lost bid (with one minute to go) on ebay, then M&M sold one (that I could have had if my darm cell phone was working - i.e. they sold it to someone else because I did not get back to them fast enough).
Oh well, still lokking.
__________________
95"Big Bore,HD Flat Top Pistons, Andrews TW-26G ,
SERT, Feuling Super Oil Pump, Feuling Lifters
HD Adjustable Pushrods, Big Boyz Ported 9.5, FAT CAT 2in1
M&M seems to be in the pipe. Maybe they'd let you order one and then you'd be next in line. They're a couple of dollars more but it may be better than trying to catch the new release that everyone seems to want. Mine will arrive Tuesday via Fed Ex surface.
I'd guess Zanotti should be getting some but who knows how mant they already have on Back Order. The long and the short of it is that Harley is shipping but no one seems to know who's next.
Good Luck!!
__________________
09 FLHTCUSE
Stock and very sweet
Does anyone know if you can use the SERT 32107-01E Tuning Software (CD Rom P/N 32117-01F) with the hardware from a later version, for example the 32107-01D SERT?
I called all over the country and no one has the SERT 32107-01E in stock. They are back ordered until April. I found one place that had the 32107-01D in stock and they assured me it would work fine. I went ahead and ordered it.
Are you guys sure the difference between the 32107-01D and the 32107-01E is only software? The dealer said he hasn't even seen the E version yet and he's been using the D version on all of his '06 models. All I really want to do is richen up my mixture a little bit. Think I did the right thing?
Does anyone know if you can use the SERT 32107-01E Tuning Software (CD Rom P/N 32117-01F) with the hardware from a later version, for example the 32107-01D SERT?
Thanks
wide: Yes! I'm currently using a 32107-01C SERT with Software CD 32117-01F. No problems!
[sm=icon_cheers.gif]
__________________
'07 Ultra Classic/Rush 1.75 Slip-ons/Ness Big Sucker I
TTS Mastertune Isolated Drive System Front Brembo Brake Conversion
Actually the latest CD part number is 32117-01G $14.50 from Zanotti's
I'm not a SERT expert, but would think that the newer versions of the SERT -01E for example are just software changes. i.e. the interface box really is just that - a device that interfaces your PC to the ECM - and HD through in a little "safeguard" - where the interface box is coded to the VIN number of the bike (sort of like a hardware license).
So, yes, if I can find an older version of the SERT, I'd go for it and then purchase the current CD version. Seems the guy above probably snagged the last SERT available on the planet! Again, just my bad luck.
__________________
95"Big Bore,HD Flat Top Pistons, Andrews TW-26G ,
SERT, Feuling Super Oil Pump, Feuling Lifters
HD Adjustable Pushrods, Big Boyz Ported 9.5, FAT CAT 2in1
SERT - need one
