http://i219.photobucket.com/albums/cc265/Haulenass/1LowProfileBackrest.jpg
We know there are Harley owners who don’t want a backrest on their bike but have women who won’t get on without one. With that in mind our designers went to the drawing board to bring us a backrest that installs and removes in minutes. All this and it still leaves your bike looking clean and smooth like your ride should be. Let’s face it, it looks way better than those bulky backrests that use side plates and clutter your bike. Cut from Heavy Duty 8 gage American steel and hit with a mirror chrome finish this thing is no sissy bar. Customize your look even more and choose from two pad styles, 4”x6” or 6”x6”.

http://i219.photobucket.com/albums/cc265/Haulenass/rubberpad.jpg

http://i219.photobucket.com/albums/cc265/Haulenass/bracketnopad.jpg

nice!

Hay What do you have for a solo seat back rest, Your set up looks great for two up seats.
Grumpa

What Grumpa said.

Will it fit my 07 Fatboy?

I told my wife no way in hell was I putting a backrest on my SG.. but if it looks like that I'll consider it...

Thanks for the interest everyone. Unfortunatly at this time we have no brackets for solo seats and or the fat boys. Have a little work to do for it to fit the fatboy and a lot of work for a solo bracket.

08_FLHX Glad to hear you might actually consider it. We had your exact thought when we designed this.

Currently our backrests fit

All FXD Dyna's
'86-'08 Sportsters
'00-'08 FXST Softail with Bob Fender

I hope you guys get around to making a Backrest for Tourers with Sundowner Solo seats. They have no slot for any other backrests to come up through. It looks like your design is could work with some modifications. I'll keep coming back to your site and checking.

what prevents it from scratching up the fender?

http://i219.photobucket.com/albums/cc265/Haulenass/rubberpad.jpg

You lay this rubber pad down under the backrest and this prevents any damage to the paint. The rubber is pretty thick and goes slightly past the edges of the bracket so your fender is protected during installation and during use.

Just make sure you dont turn around real quick not paying attention and blast your fender with the bracket [sm=headbang.gif]

How much $$$$$$$$$?

For the Smaller Pad they are $199.95
For the Larger Pad they are $209.95
For just the Backrest Bracket $149.95

We use Genuine Harley Pads that you can purchase from any HD
Dealer and we charge the same price as the dealer for them.

Hay Haulin AXX, You need to work up a solo back rest for guys like me and then a back rest set up that if a guy wants to go back to cool, have the up right part slide off and it can go in the saddle bag so when he wants to put the honey on the back its there in the bag. That will give you something to do on a rainny day.

I put one on my Sporty. I love it! It still retains the lean sporty look.

http://williamacarr.smugmug.com/photos/84868100_isvej-M.jpg

Sealbeachbum
That is one fine looking sporty you have there. Now you just need a Haulen Ass laydown license plate mount to finish that lean look ;). Mind if we post that pic of your bike up on our website?

Hope you enjoy the backrest and thanks again for your business.

Looks great, sleak slim line profile sissybar! I don' t really need for my SG, but on the other hand, one of those on mywifes nightrod would be badass!!! Keep us informed aboutthe progression from model to model.

Thanks,

JB

I need to find out if it will fit my 2008 Fat BOB..

The Haulen Ass backrest will fit the Fat Bob. If you go to www.haulenass.com (http://www.haulenass.com) it is part number HA-FXD-CBR1. Then from there you just choose what size pad you want with it.

It blends in real nice on the darker color bikes [sm=smiley16.gif]

Let me know if you have anymore questions

ORIGINAL: Haulen Ass

Sealbeachbum
That is one fine looking sporty you have there. Now you just need a Haulen Ass laydown license plate mount to finish that lean look ;). Mind if we post that pic of your bike up on our website?

Hope you enjoy the backrest and thanks again for your business.



Thanks! :D
Here's a few more pictures. Feel free to use whatever you want.

http://williamacarr.smugmug.com/photos/84868101_Dxeq6-M.jpg

http://williamacarr.smugmug.com/photos/100717754_FwWKU-M.jpg

http://williamacarr.smugmug.com/photos/129603502_PXfoU-M.jpg

Awesome Pics man. Thanks for postin them [sm=smiley16.gif]

Is this just available on line or can a guy go see the product at a distributor or store, etc

Unfortunately we are still a young company and dont have any distributors outside NY, but we're working on that. I can send pics but other than that just online.

Let your local dearlers and shops know about Haulen Ass [sm=escape.gif]

Just to let you Fat Boy guys know, we are in the works designing a bracket for you. Proto types are goin through the shop so hang tight and I'll keep ya updated

I've got 07 Street Bob and put the Harley Sundowner 2 up seat on for the wife. I measrued it and it looks like 4". Your web page says it allows up to 3.5" passenger seat. Am I measuring wrong or will this work with the Sundowner seat.

Jim

The backrest will work with the Sundowner 2up but there will be no gap between the seat and the backrest pad. The biggest gap we offer from backrest pad to the fender is 3.5" so if the seat is 4" the two will touch but still work prefectly.

Does that mean your working on a Dyna solo seat, or are you calling us Fat Boys

Um:eek:, no solo seat yet. Need more requests for it from others so we can justify paying for the tooling to make it, kinda costly[:'(]


sorry

Let me just start out by saying Our Fat Boy Backrests Are not read just yet... but shoule be about mid april. We were able to snap off some pics of our prototype at our local dealer. Check em out.



local://upfiles/46950/C0006BD0ED9C483D80F28535D52499B7.jpg

local://upfiles/46950/8D744E57766C461C83B1DAF40922B801.jpg

local://upfiles/46950/EE030D8D37D44F098C052C1F14BDFF8F.jpg

local://upfiles/46950/CD9BF94285A04B39A01C6E235207E497.jpg

Put my name on one.

:eek:bump

I would love one for my 07 RKC with the stock seat if you are going to make them

Unfortunately no RKC backrests in the plans yet

Just an update
The Fatboy backrests will be back from chrome in about a week. Hang tight, their almost ready

The Fat Boy Backrests are now available

Check em out

I have an 07 Night Train (FXSTB) with a Mustang vintage sport solo seat and the vintage sportwide passenger pillion. Willyour back rest fit with that particular passenger pillion?Also, when I remove the passenger pillion for solo riding how much additional work will there be to remove the backrest? I currently have an HD quick detach backrest but I dont like the bulky look of the quick detach cams and it would be too easy to steal, love the clean look of yours. thanks

Our backrest should work with the passenger pillion. I looked at the seat on line but couldn't tell how tall it was. Our smaller pad 4"x6" is designed to work with passenger seats up to 2.5" tall and our larger pad 6"x6" works with seats up to 3.5" tall. One of those two will accommodate your seat. Its real easy to remove the backrest, you'll remove the rear bolt for the passenger seat and the backrest and then you just have to remove a bolt at the front of the backrest bracket where the solo seat mounts on.

Here is the backrest with a road king pad

http://www.flickr.com/photos/9044807@N07/sets/72157605077006192/

i have a 08 883 and i am in the market for a 2-up seat. will this backrest work with ANY seat i may choose that will fit my bike or will it only work with certain seats?

We have two different pads that work with several seats. Our smaller pad (51534) works with seats that are up to 2.5" tall and our larger pad (52549) works with seats that are up to 3.5" tall. If you have a seat that isn't any taller than 3.5" then we have a backrest that will work for you.

black mounting hardware in the near future?

Prolly not unless we start to offer them in black... which we hardly get any requests for. I guess since Im on the topic who out there prefers the black vs the chrome?

Just doing a little research :eek:

*cricket, cricket*

Sure is quite 'round here

I think it has to do with the server was down

I think even the crickets have stopped chirping.&nbsp\\;

time to start a new thread

local://upfiles/46428/79C91FA9D55D43899B1933655E66AFBA.jpg

local://upfiles/46428/F0586634C2714D978C78CB24DE55E30A.jpg

local://upfiles/46428/E00F193FF5EB477DAF4058292E607235.jpg

I need one of those for my Standard.

ORIGINAL: Rabbit_

I need one of those for my Standard.

&nbsp\\;
Call 866.872.6876 and I can set ya up

Have ya got these ready for the newer FatBoys with 200 tire? Any drilling or modifications needed?

We do have backrest now for the Fat Boy's. If you go to our website the sku would be HA-FLST-CBR1

what prevents it from scratching up the fender?

yeah!!! good question. to me it looks like a probable suspect for scratches

We gottcha covered
http://i219.photobucket.com/albums/cc265/Haulenass/rubberpad.jpg

We got out black chrome sample back and it looks pretty sweet. Nothing in stock yet as we are evaluating it and seeing what others think before we run a bunch of them. Will keep you updated on them.

http://i219.photobucket.com/albums/cc265/Haulenass/Backrest1copy.jpg

Sorta hard to get the true look of it in a photo but it can look black to a dark graphite in certain lights.

About Mid October we will be releasing a new low profile backrest for All Touring bikes. It will have the same style and easy install as our current backrests.

http://i219.photobucket.com/albums/cc265/Haulenass/Bagger1.jpg

http://i219.photobucket.com/albums/cc265/Haulenass/Bagger2.jpg

would be all over one in wrinkle black to pair with my black denim night train. Guess I could make another trip to the powder coater :-)

That is one thing I plan on figuring out over the winter, black powder coat, wrinkle, black chrome.

Lots of options out there.