Late Model Parts on My 91 E-Glide Yes U Can
Thread Starter
|
Cruiser
Joined: Apr 2007
Posts: 102
Likes: 0
Late Model Parts on My 91 E-Glide Yes U Can
Here are the parts that Dealer said woundn't work but does.
06 RoadGlide seat on 91 - instead of expensive aftermarket but newer take offs
03 TC Exhaust on 91 EVO- for all cracked evo headers the new exhaust bolts right on and you can buy them cheap
06 StreetGlide front turn signals
more to come!
06 RoadGlide seat on 91 - instead of expensive aftermarket but newer take offs
03 TC Exhaust on 91 EVO- for all cracked evo headers the new exhaust bolts right on and you can buy them cheap
06 StreetGlide front turn signals
more to come!
Intermediate
Joined: Mar 2008
Posts: 38
Likes: 0
RE: Late Model Parts on My 91 E-Glide Yes U Can
I'm trying to find a clutch cable for a 1992 FXR, local Stealership has quoted the equvilent of $80, said it was an old bike and only one cable fitted it would have to order in special................ welcome to owning a Harley ! I read somewhere keeping a Harley serviced cost as much as a Porche. I'm starting to agree and see why the majority of owners never ride them.
Road Warrior
Joined: Apr 2007
Posts: 1,354
Likes: 1
From: S.W. Florida
RE: Late Model Parts on My 91 E-Glide Yes U Can
Van_Kerr,
If you can wait a few weeks, I have a new HD clutch cable installed on my 93 FXLR. I'll be swapping it out when I change my switch housings over and redo my top end. Less than 600 miles, only catch is there might be a wear spot in the vinyl housing where it was rubbing againt the frame. The Indy that installed the cable installed it incorrectly. I wrapped the cable with some electrical tape to protect it and it might be fine, but Iwon't be sure until I take it off.
If you are interested, PM me as I'll sell it to you cheaply.
If you can wait a few weeks, I have a new HD clutch cable installed on my 93 FXLR. I'll be swapping it out when I change my switch housings over and redo my top end. Less than 600 miles, only catch is there might be a wear spot in the vinyl housing where it was rubbing againt the frame. The Indy that installed the cable installed it incorrectly. I wrapped the cable with some electrical tape to protect it and it might be fine, but Iwon't be sure until I take it off.
If you are interested, PM me as I'll sell it to you cheaply.
Stellar HDF Member
Joined: May 2005
Posts: 2,137
Likes: 17
From:
RE: Late Model Parts on My 91 E-Glide Yes U Can
Just a quick search on Jireh Cycles' website showed a Barnett clutch cable for $35, and it's undoubtedly much higher quality than the Harley one.
And, by the way, it says they fit all Big Twin 5 speeds with stock clutches from '87 on.
And, by the way, it says they fit all Big Twin 5 speeds with stock clutches from '87 on.
Road Captain
Joined: Apr 2005
Posts: 535
Likes: 14
From: Highspire Pa
RE: Late Model Parts on My 91 E-Glide Yes U Can
ORIGINAL: L234D
Here are the parts that Dealer said woundn't work but does.
06 RoadGlide seat on 91 - instead of expensive aftermarket but newer take offs
03 TC Exhaust on 91 EVO- for all cracked evo headers the new exhaust bolts right on and you can buy them cheap
06 StreetGlide front turn signals
more to come!
Here are the parts that Dealer said woundn't work but does.
06 RoadGlide seat on 91 - instead of expensive aftermarket but newer take offs
03 TC Exhaust on 91 EVO- for all cracked evo headers the new exhaust bolts right on and you can buy them cheap
06 StreetGlide front turn signals
more to come!
thanks in advance
joe
Thread Starter
|
Cruiser
Joined: Apr 2007
Posts: 102
Likes: 0
RE: Late Model Parts on My 91 E-Glide Yes U Can
ORIGINAL: pajoe
What did you have to change to fit the newer seat? I have read this works but never got any details.
thanks in advance
joe
ORIGINAL: L234D
Here are the parts that Dealer said woundn't work but does.
06 RoadGlide seat on 91 - instead of expensive aftermarket but newer take offs
03 TC Exhaust on 91 EVO- for all cracked evo headers the new exhaust bolts right on and you can buy them cheap
06 StreetGlide front turn signals
more to come!
Here are the parts that Dealer said woundn't work but does.
06 RoadGlide seat on 91 - instead of expensive aftermarket but newer take offs
03 TC Exhaust on 91 EVO- for all cracked evo headers the new exhaust bolts right on and you can buy them cheap
06 StreetGlide front turn signals
more to come!
thanks in advance
joe
Trending Topics
Cruiser
Joined: Dec 2007
Posts: 141
Likes: 0
From:
RE: Late Model Parts on My 91 E-Glide Yes U Can
early Road ing (96) tank fits 89 FLT. Bolts right on no problem. I am trying to find a speedo and sending unit that will work with the 96 RK dash setup.
I will post results when accomplished. I should have a big list of stuff that will work by the time I am done.
I will post results when accomplished. I should have a big list of stuff that will work by the time I am done.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
Seasoned HDF Member
Joined: Aug 2007
Posts: 8,202
Likes: 3,089
From: NW AR
RE: Late Model Parts on My 91 E-Glide Yes U Can
gottahavvitt, try 
instead of in all caps, and I also see that your end thingie doesn't have the '/' in it. You have two '[IMG]' instead of [img][/img]. I'm not sure, that's just a thought.
Hey L234D, tell me about that exhaust. I need to do something about mine. Everything fits in place of the original? Any mods needed? Any TC exhaust work on a dresser on only some of them?
My crossover pipe shattered and I dropped an exhaust valve guide because of it. Sucked.
Hey L234D, tell me about that exhaust. I need to do something about mine. Everything fits in place of the original? Any mods needed? Any TC exhaust work on a dresser on only some of them?
My crossover pipe shattered and I dropped an exhaust valve guide because of it. Sucked.