Shovel cams and valves
Login  | |
|
Shovel cams and valves - 4/10/2008 7:57:45 PM
|
|
|
1979fxs
Posts: 8
Joined: 3/21/2008
Status: offline
|
I am looking for suggestions on cams.
Here is a break down of what will be run.
74" .020 over KB's
dual plug heads
dual Dyna coils
Dyna digital programmable ignition
S&S Super E carb
4 speed tranny
I am also looking for information on valves. I measured mine pretty closly and the exhaust is about 1.75" and intake is 1.93" are these stock? I am looking for a well rounded cam that will give decent mid and top end performance.
It looks like Andrews are reasonably priced and the A or J grinds seams like the options that would suit my needs.
Thank you,
Tom
|
|
|
|
|
|
|
RE: Shovel cams and valves - 4/23/2008 11:46:44 AM
|
|
|
Bouncer
Posts: 6
Joined: 4/17/2008
Status: offline
|
I would run the Manley street stock stainless steel valve set. There is a package deal that comes with the springs, collars, and keepers. I would also replace the valve guides with Ampco 45's and k line valve seals. I would also run solid lifters and Andrews pushrods to really wake this motor up. With this setup, you will have a solid, long lasting top end.
The Andrews A grind would be a great choice.
The only thing I would do different is run wisco pistons. Only because they offer a higher compression verison, but it will run very well on your choice of piston also.
Hope this helps you out.
_____________________________
IF IT AIN''''T BLOWN IT CAN ONLY SUCK
|
|
|
|
 Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Advertising Info
|
Contact Us |
Advertising |
Motorcycle Directory |
About HDF |
Archive |
Link To Us |
Sitemap |
Harley Davidson Links |
Legal |
Privacy Policy |
© Harley Davidson Forums
HDForums.com is not affiliated with or endorsed by Harley Davidson, Inc.
|
Printable Version
