SERT Map needed for 98" GMR w/Tw-37
 

Anyone have a SERT map that runs well in a 98" and gets decent gas mileage?

RE: SERT Map needed for 98" GMR w/Tw-37
 

What else do you have in the build....all that info is important

RE: SERT Map needed for 98" GMR w/Tw-37
 

From the top:
2005 FLTRI
98" RevPerf kit setup for 9.7 compression
GMR performance CNC ported heads
Andrews TW-37 gear driven cams
HD "B" lifters
Baisley LMR 002 oil bypass spring
Stock throttle body and injectors so far as I know
SE air cleaner with ugly football cover [plan to buy a Kuryakyn Hi-five someday]
Hb-125 auto primary chain adjuster
HD touring mount oil cooler
Vance and Hines ProPipe HS [not the new blueproof crap]
SERT version 4.5.2


This kit motor has about 10,000 miles on it and doesn't use any oil that I've noticed in the 4,000 miles I've put on it since buying last summer.


If you're HDMD, like I suspect you are, I know your capabilities and would be willing to buy a map from you if you have one that would fit the bill. This bike was tuned by the flunky at Faribault HD in MN. He'd tuned my electraglide before and I know his work...this one runs just like my electraglide did....great under load and at WOT, LOUSY at light loads under steady throttle. So cruising through town it just constantly stutters, surges and pops. My other bike, I had 'fixed' by Mike Roland....phenominal job...but spendy! The economy and current financial situation tells me to look for a more economical alternative than another 4-5 hour dyno session. Appreciate the response whatever the outcome.

RE: SERT Map needed for 98" GMR w/Tw-37
 

Email me at hdmd88@yahoo.com so we can get you your map off to you asap....ye old sea hag.....:D

RE: SERT Map needed for 98" GMR w/Tw-37
 

Doc 1 i know you are a very busy man..... but you are never too busy to help someone when they need it for free...i know it just kills you to see so many peeps with a bad tune..and you are always there to help fix other peopls screwups.. not very many people do that these days.. You are 1 hell of a stand up guy....Thanks.

i know i haven't been here long or in the motor cycle world long to see what kind of person you are.

so have a beer on me....


[IMG]local://upfiles/43892/5331BBFE093E48AEA09295949175CEE2.jpg[/IMG]

RE: SERT Map needed for 98" GMR w/Tw-37
 

Thanks for you kind words.....kind wordsgo further than payment at times.

I try to help plus I have a lot of time on my hands at times....I did, however, tell a board member here for $50.00 I'd send him a map....hey everyone else is making $50.00 on a map and I happened to have exactly what he needed but....I never heard back from him....go figure...lol
Again Thanks for you support.
Doc

RE: SERT Map needed for 98" GMR w/Tw-37
 

I just wanted to publicly acknowledge Doc's tremendous help with setting me straight. With his help, I now have a GREAT running bike and my most recent miles per gallon figure was up to 45 from an avg of 36-38.

Someday I'll take advantage of one of the 3 pull dyno specials and see what the results were, but the bottom line is I don't care what the peak numbers read so long as it runs great everywhere I need it to.

RE: SERT Map needed for 98" GMR w/Tw-37
 

Fifty bucks for a map that is a match is very fair. If I needed one I would gladly pay that NP.