Primary chain case
Thread Starter
|
Cruiser
Joined: Jan 2005
Posts: 189
Likes: 1
From:
Primary chain case
A question for the gurus! Changed the fluids on my 05 RKC this afternoon and the good book calls for 32oz in the chain case and it should take it to bottom of clutch spring. I put in 32 oz and you can just see it at the very bottom is this enough fluid? i know it is not good to overfill either. thanks SK
Seasoned HDF Member
Joined: Sep 2004
Posts: 6,197
Likes: 708
From: (Toronto) Canada
RE: Primary chain case
32 is good. The bike has to be level, and straight for this test. It's crazy that the oil test is on the side stand, and the primary fluid test is on a jack, but that's HD. Logic does not always apply.
Seasoned HDF Member
Joined: Jan 2005
Posts: 21,949
Likes: 6
From: My house
RE: Primary chain case
ORIGINAL: Joe Scout
32 is good. The bike has to be level, and straight for this test. It's crazy that the oil test is on the side stand, and the primary fluid test is on a jack, but that's HD. Logic does not always apply.
32 is good. The bike has to be level, and straight for this test. It's crazy that the oil test is on the side stand, and the primary fluid test is on a jack, but that's HD. Logic does not always apply.
Thread
Thread Starter
Forum
Replies
Last Post
