Harley Davidson Forum

REDUCED EFFORT CLUTCH QUESTION

  Printable Version
Harley Davidson Forums >> General Harley Davidson Tech Forums >> Primary/Transmission/Driveline/Clutch >> REDUCED EFFORT CLUTCH QUESTION Page: [1]
Login
Message << Older Topic   Newer Topic >>
REDUCED EFFORT CLUTCH QUESTION - 5/1/2008 8:37:10 PM   
Tanker2


Posts: 52
Joined: 12/17/2007
Status: offline
I would like to install a Harley brand part # 36808-05 reduced effort clutch on my 1999 Ultra Classic 88 twin cam. At least I thought I would. I plan to do it myself. But I have read some posts on here that think it makes your clutch slip. I don't want that to happen. You wouldn't think that would be the case since they are using them on the newer models. One guy didn't even think it helped much. I have small hands and could sure use the reduce effort. I'm not a hard rider. But do like to get on the bike a little. Let me hear what you guys experience has been and any tips you can give me. Do you have to remove the left side exhaust to remove the outer primary cover. Thanks
Post #: 1
RE: REDUCED EFFORT CLUTCH QUESTION - 5/2/2008 12:59:54 AM   
Megalomania


Posts: 134
Joined: 4/12/2007
Status: offline
I have one and love it.  Does not slip, but I ride a Softail, not on an Ultra.

(in reply to Tanker2)
Post #: 2
RE: REDUCED EFFORT CLUTCH QUESTION - 5/2/2008 5:30:19 AM   
1FLTRI4ME


Posts: 2521
Joined: 4/10/2006
From: Hollister,California.
Status: offline
I installed one on my broinlaws '05 Road King.I had to remoove the exhaust from the right side to get to the tranny cover and had to remove the the primary cover to get the spring in.
The clutch did not slip.Most people say the clucth could slip if the engine is not stock.

_____________________________

2006 Road Glide,Chopper Blue,SE slip ons,K&N,SERT,color matched lowers.

(in reply to Megalomania)
Post #: 3
RE: REDUCED EFFORT CLUTCH QUESTION - 5/2/2008 7:13:26 PM   
DGlide04



Posts: 2671
Joined: 4/12/2005
From: Hudson Valley- NY
Status: offline
DGlide04's photo gallery
I installed one on my 2004 Superglide 2 weeks ago, which is not exactly stock.  The 88" has been hopped up 95" and even wound out, nothing has slipped.  The reduction in pull effort is notceable and worth the effort to put it in.  Aside from having to remove the primary and transmission side cover,which can be messy, the actual install is straight forward, a 1-2 hour job tops.

I say go for it.


_____________________________

Thinking "outside the box" most places will get you a box and an escorted walk to the door.

2004 Sierra Red Pearl FXD, or at least that's what it started life as.

(in reply to 1FLTRI4ME)
Post #: 4
RE: REDUCED EFFORT CLUTCH QUESTION - 5/2/2008 8:50:27 PM   
Jumpman


Posts: 820
Joined: 12/18/2006
Status: offline
Jumpman's photo gallery
I did it on my 1999 Road King...

Then on my Pops 2004 Ultra...

Then on my buddies 2002 Road King...


WELL worth the cost and time.

_____________________________

Jumpman



"I''ll bust a Travis Bickle if I feel that I''m being pushed, don''t step to me, or you''re gonna get smooshed..."

(in reply to DGlide04)
Post #: 5
RE: REDUCED EFFORT CLUTCH QUESTION - 5/3/2008 5:52:06 AM   
Tanker2


Posts: 52
Joined: 12/17/2007
Status: offline
Going to get one today. Thanks guys for the info.

(in reply to Jumpman)
Post #: 6
RE: REDUCED EFFORT CLUTCH QUESTION - 5/9/2008 11:38:55 PM   
crzrdude

 

Posts: 43
Joined: 5/5/2008
Status: offline
I have been installing the reduced effort kit on all my bro's bike as well as on my own. I do it a little different though. I only use the ramp out of the kit for the release side but I add the "White Bros" easy pull clutch on the cable $15. A little grinding of the bracket makes it perfect. Then I purchased the S.E. clutch spring #37951-98 for $25. That can be installed thru the derby cover, you don't have to take the outer primary cover off. You see my bike is an '06 and came stock with the reduced effort kit. After going to 100+ H.P. 95" my clutch wouldn't hold. So adding the S.E. spring first tightened my lever. Adding the "White Bros" kit made it easier than before the spring change. All my bros run heavy clutches but with my kit it feels wimpier than a stock '06. Making burn outs and hole shots real easy to control. Just something to chew on to help you decide.

(in reply to Tanker2)
Post #: 7
RE: REDUCED EFFORT CLUTCH QUESTION - 5/10/2008 5:42:14 AM   
Branner


Posts: 362
Joined: 2/22/2007
From: Buffalo
Status: offline
Branner's photo gallery
quote:

ORIGINAL: crzrdude

I have been installing the reduced effort kit on all my bro's bike as well as on my own. I do it a little different though. I only use the ramp out of the kit for the release side but I add the "White Bros" easy pull clutch on the cable $15. A little grinding of the bracket makes it perfect. Then I purchased the S.E. clutch spring #37951-98 for $25. That can be installed thru the derby cover, you don't have to take the outer primary cover off. You see my bike is an '06 and came stock with the reduced effort kit. After going to 100+ H.P. 95" my clutch wouldn't hold. So adding the S.E. spring first tightened my lever. Adding the "White Bros" kit made it easier than before the spring change. All my bros run heavy clutches but with my kit it feels wimpier than a stock '06. Making burn outs and hole shots real easy to control. Just something to chew on to help you decide.


And to think I was going to add something new! +1 on that White Bros. kit. Roland Sands / Performance Machine make one too. Might be a nice addition while you're at it.

(in reply to crzrdude)
Post #: 8
RE: REDUCED EFFORT CLUTCH QUESTION - 5/26/2008 6:26:17 PM   
EdboIllinois

 

Posts: 178
Joined: 1/3/2007
Status: offline
Just change the ramps that come in the kit, but not the clutch spring.  The spring that is included in the kit has less tension than the stock spring. The stock spring is fine for stock or mildly ugraded motors. If you decide to change the clutch spring, go with the Screamin' Eagle. 

(in reply to Tanker2)
Post #: 9
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Harley Davidson >> General Harley Davidson Tech Forums >> Primary/Transmission/Driveline/Clutch
Jump to:



Featured Sponsors
Advertising Info

New Vendors
Warehouse Direc
Baker Drive Train
Haulen Ass
Pickard USA
Harley Goodies
Pickard USA
AMSOIL - Performance Oil Technology
Brain Bucket Magazine
HDForums.com Sponsors
AMSOIL - Performance Oil Technology

HDForums.com is not affiliated with or endorsed by Harley Davidson, Inc.