Mounting V&H shortsshots !!

Harley Davidson Forum

Sponsors

Harley Davidson History

Mounting V&H shortsshots !!

Printable Version

Harley Davidson Forums >> General Harley Davidson Tech Forums >> Engine/Fuel/Intake/Exhaust >> Mounting V&H shortsshots !!

Page: [1]

Harley Davidson Forums Sponsor

Engine/Fuel/Intake/Exhaust Sponsored by Russell Performance

Login
Message << Older Topic Newer Topic >>

Mounting V&H shortsshots !! - 5/11/2008 11:53:11 PM

hdviking

Posts: 37
Joined: 8/2/2007
Status: offline
Hi !
Just bought new pipes for my 05 Softail Deluxe, a set of Vance & Hines shortshots staggered with a Fuelpak.

Is the mounting of this easy or do i meet any problems ?

Do i need to remove the right side passenger peg ?
Other things to be aware of ?

Cheers !

Post #: 1

RE: Mounting V&H shortsshots !! - 5/12/2008 12:28:03 AM

SK8ROD

Posts: 437
Joined: 3/20/2008
Status: offline they went onto my Dyna in a matter of minutes, didnt have to remove RHS peg in fact there's nothing to warn you on at all, its a straight forward procedure. Once you have torqued down the exhaust flanges at the headers ( make sure you do it the way the manual lays out ) and taken the bike for a test run, you will have to re-torque them down again as they bed in, in fact i had to do mine again a day later but now all is fine, no leaks etc.

pete

(in reply to hdviking)

Post #: 2

Login OR Register now to post a reply to this forum topic.

Page: [1]