Anybody replaced the stock wrinkle coat panel on their SB? I think HD hit a home run with the leather trim they used on the Cross Bones fuel tank....didn't know if there was something similar out there that could be used on an SB.

__________________
2008 Street Bob, Vivid Black
- Jackyl's 2" Tank Lift
- More to come...just getting started!

Good deals with Jackyl, mudpuddle, and nycfxdl

i replaced it with a gloss black low rider dash

__________________
Joe Knapp “Your life is an occasion. Stand up to it”

Chicago, IL "If you can buy it, you can build it better"

Where'd you go for it?

__________________
2008 Street Bob, Vivid Black
- Jackyl's 2" Tank Lift
- More to come...just getting started!

Good deals with Jackyl, mudpuddle, and nycfxdl

i got it from a member that took his off, then i media blasted it and powder coated it black, that way i can run a tack!

__________________
Joe Knapp “Your life is an occasion. Stand up to it”

Chicago, IL "If you can buy it, you can build it better"

I too have done what JRK did. I got a Low Rider dash off a member here, then got a tach for a Loe Rider dash and now have speedo and tach. Other than that, the lower part looks just like a SB dash. I would interested in if someone had a leather cover for the lower part of the dash.

__________________
"06 Street Bob, Denim Black, PCIII, S/E A/C Stage 1, 16" apes, 16" rear rim, lots of powdercoat, SALS member, Member of Patriot Gaurd Riders (PGR)

Was it a pretty easy install for the tachometer and new dash?

__________________
2008 Street Bob, Vivid Black
- Jackyl's 2" Tank Lift
- More to come...just getting started!

Good deals with Jackyl, mudpuddle, and nycfxdl

does any one still have the stock sb wrinkle coat panel for sale?

__________________

Steve
'08 FXD
V&H 2into1 Big Radius, SE Heavy Breather, PCIII,
Fat bob Drag Bars, SB Tank Conversion

Do you have a picture of your dash?

__________________
We will always remember. We will always be proud. We will always be prepared, so we will always be free.

+1

I'd love to replace mine with a carbon fiber one . Al I have to do is make one