Panacea LED lighting HELLLLP!

Bikerboy50 · #1 05-31-2008, 05:43 PM

Hello all,

I am suffering from a tiny bit of hair loss after this one, and it SHOULD have been a bit easier, but it turns out not to be so easy, at least for someone who isa bitelectronically challenged in some areas.

Here's what I'm up against: The Kury LED system I just got, the part numbers for the set are 4825, 4827 and 4833 along with the alarm compatible TSSM ...I'm trying to get those to work together with the LED lighted rear turn signal mounts, and the HD part number for the mounts I have is 68624-04A.

After hooking everything up the way I THOUGHT it was supposed to be

I have an issue getting this to work properly and I'm not 100% certain as to exactly how to solve this issue, I have used the security TSSMequalizer that was purchased separatley along with two of the three load EQ's that came with the set.[/align][/align]The front led's burn solid and blink just fine, but the rears burn solid only, while the taillight blinks fine as well....I am using the rear turn signal mounts that do also have led's in them as well(68624-04A), but after completely unplugging those to trouble shoot, it made no difference...I can see where the "red" module for the system has two plugs on one end for the EQ's, I have the TSSM plugged into one of them and two load EQ's hardwired together and plugged into the other...so now I have one EQ left over, should I be using that?....Im totally lost on something that sounds SO simple....sheesh[/align][/align]Thanks in advance[

][/align]

Shooter92 · #2 05-31-2008, 06:22 PM

Hi,don't know if I can help but I just installed the complete panacea system on my bike about a month ago. I used the alarm compatible eq. along with the eq. that came with my front led lights. Mabe try it with only 2 eqs. Hope this helps.

Bikerboy50 · #3 05-31-2008, 06:31 PM

Thanks Shooter,

I did try that, but wound up with the same results, but thank you for your response...

05Harley · #4 06-25-2008, 02:42 PM

Hi Shooter,
I just hooked up led lights front and rear. I am trying to hook up the badlands load equalizer lll but cannot locate the tssm wire. Do you know what color this wire is and where it is located?
&nbsp\\;
Thanks