Just received my PCIII from Jamie at FM. I can't believe it but I can't get the 2 bolts out (allen key)..they just keep spinning...Is there a trick to this? I've heard this is a 20 minute job but I've spent 20 minutes just trying to get these things out? Any help would be appreciated.

__________________
2006 Road King Classic
Cobalt Blue
PC III
A/N Big Sucker AC
Rush 1.75" Slipons

Can't help, but I should have my PCIII this weekend. Tried the IED's but was not as
impressed as all the others.

__________________

http://i199.photobucket.com/albums/aa270/efciv/sig1.jpg
07 Super Glide Custom

What 2 bolts?

The 2 bolts on top are torx an allen will not work on them. Has 1 allen in center of panel.I believe they are T45 but would have to check mine to be sure.

uhm, you have two bolts on the side and two on the top, ones on the side are allen ones on top ( along frame tube ) are torx,, which dont remove??&nbsp\\; not entirely sure what your doing there because when i fitted the PCIII getting the electrical box out was the easiest part

sorry...might not have clear in my first post....the 2 bolts I'm trying to remove hold the ECM tray to the battery tray...they are allen's and not torx.&nbsp\\; they were tight but once i got them moving they just spin and now will not come out and cannot tighten either??&nbsp\\; It's an '06 RKC.&nbsp\\; thanks for any help

__________________
2006 Road King Classic
Cobalt Blue
PC III
A/N Big Sucker AC
Rush 1.75" Slipons

Tried to post answer, can't get it all in.

__________________

05 RK Classic, Black Cherry
IBA member #32738
"Before anyone did anything, Elvis did everything".

Cant reply

__________________

use a drill with an allen bit

__________________

They will come right out

__________________