OK, I installed the Kuryakn LEDs, both front and read turn signals, rear taillight and the flash module. Except that the bike had the power/ground wired in reverse (purple was ground, black was power) every thing works OK........except the right turn signal does not work. Left is OK, only the right does not flash. When I use the 4 way flashers, again the right does not flash. I tried the right lense in the left side and it works properly so I know the LED is OK.

Any thoughts would be appreciated.

__________________
Daniel J Lord

LED's are polarity sensitive, so if you didn't correct the backwards polarity of the wires, then that is your problem.

__________________