If this should be in the oil thread...let me know...
&nbsp\\;
Anyhow, about 2 weeks ago a friend of mine came over and we started changing the oils in my bikes.&nbsp\\; He took off working on the softtail..before I knew it, he took the crank case plug out and drained all that oil.&nbsp\\; I put the plug back in and showed him the hose he was suppose to pull off to drain the oil.&nbsp\\; After we put the oil back in, we fired it up and it ran fine.&nbsp\\; Since then, it has drove ~150 miles with no problem.&nbsp\\;

This morning I went to fire it up to go to work and the oil light came on.&nbsp\\; I parked it and jumped on my other bike and ran to work.&nbsp\\; When I got home, I took the sending unit off and hooked a pressure guage on it.&nbsp\\; I fired the bike up and the guage never moved.
&nbsp\\;
Oil pump I assume?&nbsp\\; That much a PIA to change out?
&nbsp\\;
Thanks,

Derek

__________________
1994 Heritage
1996 Road King Classic

Take the feed line off at the case and see if you have an oil supply flowing....if not something is blocking the flow from the tank to the engine. Thats the first step

__________________
HDMD Tuning Center
EFI Training
352.242.9616
hdmd88@yahoo.com