Has anyone here changed out the windshield on their SG? I have a 2008 and i don't see the screws to remove. I have nothing on the bat wing and it all looks enclosed.. I ordered a taller sheild and want to do myself. any help ?

Uh-oh!

__________________
If everything seems to be going well, you have obviously overlooked
something.

06 StreetGlide
Wild Pigs
SE A/C
PCIII
http://i61.photobucket.com/albums/h5...9/1907copy.jpg

__________________

2007 UltraClassic\SERT\Doherty PowerPACC w/vents\Supertrapp SE's\Bagger Brace
M1 V-Twin 20W-50 in crank\Redline MTL in Primary\Redline Heavy Shockproof in Tranny

JUST&nbsp\\;SAW IT OFF!
JUST&nbsp\\; KIDDING&nbsp\\;&nbsp\\;
AHHH&nbsp\\;&nbsp\\; 3 SCREWS&nbsp\\; UP&nbsp\\; FRONT&nbsp\\;&nbsp\\;&nbsp\\; .&nbsp\\; TURN COUNTER CLOCKWISE..&nbsp\\; REMOVE&nbsp\\; 3&nbsp\\; SCREWS&nbsp\\;&nbsp\\;&nbsp\\; JIGGLE&nbsp\\; WINDSHILD..&nbsp\\; OFF SHE&nbsp\\; COMES..
&nbsp\\; REVERSE TO&nbsp\\; INSTALL NEW WINDSHILED..&nbsp\\;
PS&nbsp\\; WHADDA U MEAN&nbsp\\; NO&nbsp\\; SCREWS??&nbsp\\;

__________________
There are moments when everything goes well...
Don't be frightened, it wont last!
BOYCOTT P-M WHEELS. CHROME PEELED @ 18 MOS!
CURRENT RIDES: 07 RG, 03 ULTRA, 88 HERITAGE

Just loosen the screws at the top of the shield on the outside of the faring. Then you may want to loosen the two screws on the backside of the faring half way down below the mirrors. It is easiest if you just remove the screws at the top but be careful when installing new shield! they will strip and it is a beeeiotch to get out and replace. Do not crossthread. Slightly pull the front of the faring away from the shield and pull shield out of faring. Nothin to it.
&nbsp\\;
Chopper

Just do like everyone else and cut it down to size sawing on it with a piece of fishing line. Works like a champ.

__________________
2006 FLHTCUI
Ultra Classic
V&H Basic Slip-Ons
V&H Fuel Pak

its so easy even a caveman could do it

__________________

2007 Cobalt Blue FLHX SERT
Rhinehart True Duals IDS Hogtunes
SE air cleaner w/ K&N filter

Do you have the solid piece of molding on it?&nbsp\\; Trust me, this is an easy one.&nbsp\\; Windshield replacement should only take abou 5-10 minutes, and that counts fetching the tools from the box.

__________________

2003 FLHTCI

&nbsp\\;
You're kiddin, right?&nbsp\\; When you find them don't remove the three invisible screws, just back them out a ways and pull out the old wind screen and replace it, tighten the screws and voila your done.&nbsp\\; By the way have you checked the slack in your throttle cables on that '08?&nbsp\\; I hear the adjusters are hard to find too.

__________________
Northside

Wow....just wow

__________________