what a pain in the butt to get too, anybody got any tips or tricks for getting the cover off and check the fluid level?

__________________
2007, vivid black street bob

Pull the battery box cover and you get a little straighter angle on the screws.&nbsp\\; Use a good screwdriver of the correct size, and take care not to strip them.&nbsp\\; Unscrew both screws until they are loose of the resevoir, but still through the cover.&nbsp\\; Reach through from the bottom and take the cover off.&nbsp\\; I use a long funnel with a couple of bends in it.&nbsp\\; A short funnel with a clean, clear hose would work well also.&nbsp\\; Try no to contaiminate the fluid, to include introducing water from the funnel, and remember that that fluid will marr or even remove some paints.&nbsp\\; Look at the gasket when you take the cover off.&nbsp\\; It sticks into the resevoir, and will displace some fluid, so you don't need to fill it to the brim.&nbsp\\; Good luck.

__________________

yuo i know its a 1/4 inch from the top
freebyrd

__________________
2007, vivid black street bob