Here is what I did, I spliced into the output side of my Kuryakyn run, turn, brake conrtroller. I ran two wires back to my tour pac, and fron the kury controller powered the bright filiment of my standard filiment bulb. I cut and taped off the wires that were originally supplying current to the parking light, and brake light in the tour pac. I supplied power to the bright filiment of the bulb in the tour pac from the wires I ran back from the Kury controller. I now have brake, run, turn on both the lower signal lights, and the lights in the tour pac. So far so good. Does anyone see a problem. and has anyone done this ?&nbsp\\;

__________________
07 Ultra Black Cherry / Pewter
SE AC
Reinhart TD's
PCIII USB III
IDS

sounds good why no pics ???

__________________
06 Road Glide se stage 1 a/c se mufflers
mustang seat custome chrome parts
Arlen Ness Hotshot ton of kuryakyn harley thunder star rims
arlen ness / h-d a/c fullsac true duals

I did something a little different but a lot easier than that to get flashing brakes on the tour pak.&nbsp\\; I used a brake modulator only on the (upper) brake lights on the tour pak.&nbsp\\; I wired in a brake modulator from comagination.com.&nbsp\\; I also have the HD&nbsp\\;Turnsignal kit for the turnsignals to turn them into brakes.&nbsp\\; This is the kit that replaces the amber lens with red and reverses the turn signal blinking (69461-06A).

__________________
2007 Ultra Classic
2007 Street Glide

I wired my saddlebag spoiler LED's to function as turn signals in addition to the run/brake function by splicing the HD module.&nbsp\\; As my TP is detachable and I didn't want to fool with more quick disconnect wiring, I didn't bother doing the TP lights.
&nbsp\\;
Congrats on the project.

__________________

CMA, Crossties Chapter (GA)
IBA 26580
'04 FLHTPX