Stock SB bars to dragbars with 6" risers ?

LeadSlinger0311 · #1 07-07-2008, 06:15 AM

just need to know if i need to change the cables .
&nbsp\\;
on going from Stock Streetbob bars to drag bars with 6 inch risers .
&nbsp\\;
I have heard it will work but just wanted some back up on that from the experts here .
&nbsp\\;
thanks for any info
&nbsp\\;
later
&nbsp\\;
Slinger

sporty79 · #2 07-07-2008, 07:09 AM

I did it.&nbsp\\; You have to put an "S" bend in the brake line, but it will work

LeadSlinger0311 · #3 07-07-2008, 08:08 AM

great thanks for the info bud .
&nbsp\\;
Slinger

rounder · #4 07-07-2008, 08:50 AM

run your cables through the triple tree otherwise they not gonna look right.

VenturaChop · #5 07-07-2008, 09:09 AM

new throttle and idle and brake line&nbsp\\;&nbsp\\;&nbsp\\;&nbsp\\;&nbsp\\;&nbsp\ \;&nbsp\\;&nbsp\\;&nbsp\\;&nbsp\\;&nbsp\\;&nbsp\\; &nbsp\\;&nbsp\\; clutch is not nessesary

rmatt34 · #6 07-07-2008, 09:27 AM

I did four inch risers with the stock mini apes, so I would have to say no cables or wiring needed. I changed nothing, I did run the clutch cable in front of the bars instead of behind, it looked better and gave me more clearance when turning bars all the way to the left. I also bent the brake line a little beneath the tripple tree to give me a couple inches, the throttle and idle cables needed to be bent (Carefully!!!) under the grip to point more straight down.
&nbsp\\;
If i did four inch risers with the mini apes, you should be fine......
&nbsp\\;
&nbsp\\;
&nbsp\\;
&nbsp\\;

LeadSlinger0311 · #7 07-07-2008, 09:30 AM

thanks . Fellas
&nbsp\\;
Slinger