&nbsp\\; I have a 07 street bob and put a 180 tire on it and want to lower it will it rub ?&nbsp\\; I ride 2 up half and half.

no it wont..................... . . . . ..................... . . . . .......................

__________________
http://i148.photobucket.com/albums/s..._2007/SIG6.jpghttp://i148.photobucket.com/albums/s..._2007/sig5.jpg

alright thanks

mine did... i had to rewire the whole underside of the fender, i re routed my wires along my fender rails... I kept ripping them out with the 180... so i got sick of it and just re soldered everything... granted i did air shocks so i went real LOW, i weigh 200lbs, and when i run 2 up she is 98lbs... with only 300 lbs on there we will get rub on occasion... not enough to go though the protective rubber under there, but enough to rip out your turn sig wires... people have had diff luck though... i however had to rewire (it was real easy anyway)

__________________
Joe Knapp “Your life is an occasion. Stand up to it”

Chicago, IL "If you can buy it, you can build it better"

&nbsp\\;I saw it done by the dealer it fits but very close . to close for me&nbsp\\;&nbsp\\; I looking at a 170 a little more room &nbsp\\;

__________________
LIVE TO RIDE

ooh it is not that close! i can still get fingers under there between the rails... just how my wiring was done was a bit crappy... (just was not tight) so i cleaned it up... it will work no problem! hell people toss 200's under there!

__________________
Joe Knapp “Your life is an occasion. Stand up to it”

Chicago, IL "If you can buy it, you can build it better"

I have 11" Progressive 412s and the SE 180 nothing rubs.However, I also have my wiring run out side the fender behind the rails.

__________________