PC III TIGHT FIT ON SB
Thread Starter
|
Stage II
Joined: Jul 2008
Posts: 2
Likes: 0
PC III TIGHT FIT ON SB
Anyone have trouble installing the PCIII per the instructions....I got it installed but it was tight and not much room for plugging in the usb for future tuning..... any tips for a cleaner install?
 \\;
08 SB
FATCAT
BS
PCIII
 \\;
Thanks
 \\;
08 SB
FATCAT
BS
PCIII
 \\;
Thanks
Road Master
Joined: Jul 2006
Posts: 750
Likes: 1
From: Katy, Texas
RE: PC III TIGHT FIT ON SB
Loosen the electrical caddy to give you more room to work. Its tight but it will fit. Make sure to use dielectric grease at the connector. I took it a step further and shrink wrapped the connector.
Tourer
Joined: Jan 2008
Posts: 349
Likes: 1
From: Milford, Kansas
RE: PC III TIGHT FIT ON SB
I installed as instructed but before I put it all back together I set the throttle position and hooked up and routed the USB for future use. \\; I would agree that accessing the usb port for tuning would be a bear. \\; That's why I left mine plugged in.
Road Warrior
Joined: Apr 2008
Posts: 1,393
Likes: 8
From: Ohio
RE: PC III TIGHT FIT ON SB
I just finished installing one tonight. \\; I left the ECM connectors under the seat and faced the usb port towards the battery, under the ECM. \\; I also left the usb cable connected and routed it through the electrical box, stowing the excess cable in the data port housing under the electrical box connector. \\; That way I can just pull the cover to plug in instead of pulling the seat. \\; I don't see how you can access the usb if it is facing towards the rear. \\; My fender and frame completely block it.
Club Member
Joined: Feb 2008
Posts: 11,483
Likes: 39
From: Passaic County, NJ
RE: PC III TIGHT FIT ON SB
I did the same thing Pig did. Mine is under the seat. However I left the usb cable connected and inside a ziploc baggie to protect it from the weather. I don't even have to pull the pc out of the frame to adjust. Got the baggie idea from someone on the site.
Trending Topics
Club Member
Joined: Feb 2008
Posts: 11,483
Likes: 39
From: Passaic County, NJ
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
Thread Starter
|
Stage II
Joined: Jul 2008
Posts: 2
Likes: 0
RE: PC III TIGHT FIT ON SB
SK8ROD....Thanks for the tip on mounting the PC under the seat....worked great....had it dyno tuned today...very happy with the results....map from Jamie at Fuelmoto was pretty close..a little rich....started with Tq 92.8/Hp 77.1..finished with Tq 96.6/ Hp 79.8.
 \\;
Dyno tuned \\;by Kevin Hunt at \\;KWS Motorsports in N Charleston, SC
 \\;
08 SB
AN BS
Fatcat
PCIII
 \\;
Dyno tuned \\;by Kevin Hunt at \\;KWS Motorsports in N Charleston, SC
 \\;
08 SB
AN BS
Fatcat
PCIII
Thread
Thread Starter
Forum
Replies
Last Post