I didn't bother to notice that the kit didn't have anything to put in the back holes that were left when the turn signals were moved. It says the saddle bag hardware will take care of that but I don't have that yet. . .
Aren't some kind of bolts needed in those holes to help stabilize the bar and the fender? If so can you tell me what to get or use until I get my saddle bag supports?
Also, what saddlebag supports do you use and what is cheapest but still good?
&nbsp\\;
Thanks
&nbsp\\;
Tom

__________________
2007 Super Glide. "Big Baby".
Harley Forward Conversion
Rush Baloney Cuts with 2 in baffles
SE Stage 1 intake
Sundowner
PC3
Happily married with teen kids. Wife loves to ride along.

Went to local True Value and picked up 2 stainless steel snap in hole plugs to fit the
empty holes fro about&nbsp\\;a buck and a half. Problem solved on my WG.............&nbsp\\;

my quick detach mounting kit came with this oval shaped chrome steel that covers the holes.&nbsp\\; kinda looks stupid but it does the job.&nbsp\\; i thought hd would come up with something better than that, but a well...
&nbsp\\;
cap from Ace, as stated, sounds like a good option.&nbsp\\; also i was thinking of using black caps from harley that go into the top of the fender or something similar!

__________________
Josh,




'08 Street Bob
-forwards
-V&H short shots staggered
-wrinkle evo stage 1 A/C
-PCIII
- + other mods

you can also go to your stealer and get a couple of bolts and nuts to match the front strut fasteners....If you have two holes back there also get a little chrome cap for the empty one (used for the wiring)...they should have them....I did this before, the chrome button head bolts and nuts were like $5 or something.

__________________