yet another SERT ???/

roady · #1 04-10-2006, 11:04 PM

I cant seem to find the answer to this ? Can you put the original factory setting back in the ECM ? I have an 06 Roadglide with 95" kit with 203 cams and SERT. Problem is I cant find a tuner anywhere around where I live in MD to tune the SERT. If I put the original setting back in I can get a Power Commander installed by a very reputable tuner for about 500-600 bucks including the Power Commander. The tuner said that I would need the factory setting back in the ECM though. Thanks for any help.

Shovelhead Bob · #2 04-10-2006, 11:16 PM

Yes, You can re-install the stock flash... Your dealer will have to do it though...

Dan B · #3 04-11-2006, 04:50 PM

Maybe a dumb question, but why hasn't the SERT a map with the factory setting?

//Dan B

roady · #4 04-11-2006, 07:27 PM

Dan B I didnt quite understand your ??? but I am using a factory setting now that is close to my build but the factory setting is using the Sceaming Eagle pipes and I am using the Rinehart True Duals and from what I hear is that is a big differance. Then I should still have it dynoed to fine tune but I cant seem to find anyone local that will fool with the SERT while doing the dyno. What does everyone here think of HDMAPS does there maps work well, I just talked to guy named Jay that seemed pretty helpful. I just wanted to check in with everyone here. Thanks for any help.

Shovelhead Bob · #5 04-11-2006, 07:51 PM

Because it is a RACE Tuner... Stock maps aren't going to be used for a race application...

roady · #6 04-11-2006, 08:27 PM

does anyone here have a map for my application that they would like to share. My application is: 06 RoadGlide with Screaming Eagle Stage 2 95" kit with 203 cams and SE AC and Rinehart True Duals or do I spend the money on the HDMaps site and try and find someone that can dyno it .

KBFXDLI · #7 04-12-2006, 02:11 AM

You may want to rent a trailer instead and trailer your bike to a full service dealer who can dyno it for you for $300. Everything I have read tells me the SERT is better than the PC if dyno'd by a competent tech. So go on the HD website to the dealer locator section and find a dealer who will dyno your bike and give you a copy of the map on CD as well. It can't be that hard.