Stage 1 Download Sucks!!
A while back I went ahead and did the stage 1 download to my 03 RK Classic just so I could be on the "Safe side" If my PCIII went belly up. I could not tell a difference at all in the download over stock. I am using the PCIII map for my setup, M807-010, and the bike is still lean. I had to make my own Frankenstine monster out of 2 maps the M807-010 and 807-016. I copied everything from 0 to 5% on the M807-016 and pasted it into the 807-010, and from 0% throttle 2000rpm all the way to 6200rpm, I increased the fuel percent to 20. I did this upon talking to Dynojet tech about the decel pop. So far the bike runs great and the plugs have a nice tint of tan to them. Maybe still a little lean but a whole lot better than before. Fule milage is holding around 41MPG. Also, I copied the ignition advance from the M807-016 and pasted it into the M807-010. Seems to have gotten rid of my ping on hard acceleration.
__________________
zz
2007 RK Classic
V&h basic
Fullsac conversion
PCIII USB
SE/AC
IDS
|
