looking for harley stock take off parts. lower legs,touring lower legs and upper covers ,switch housings,levers,front master cylinder/clutch perch. let me know what you have....

What type of bike do you have or are you looking at parts for?

__________________
Thinking "outside the box" most places will get you a box and an escorted walk to the door.

2004 Classic Black Road King, mostly stock for the time being.

Stock mufflers from '06 Low Rider.

You're close enough to pick them up and save shipping!!!

PM me if interested.

Sammi

__________________
...and so it goes.

2006 Low Rider
Black - the Fastest Color!!!

from a 07 FatBoy: floorboards, brake lever, heel/toe shift lever, passenger pegs, headlight trim ring

__________________
2007 FatBoy

All I can think of off the top of my head is this. I’m sure there’s a few more items around the garage somewhere.
Take-offs from 2003 FXD:
Outer primary cover, trans covers (top and side), cam cover, rocker box cover (both pieces), switch housings, master cylinder (front), stock pipes including muflers, exhaust bracket, and heat shields, electric pannel cover, battery cover, handlebars, wheels with tires mounted (aprox 8,000 on the tires), rear pulley, upper belt guard, clutch cable, throttle and idle cables, front brake line, speedometer mount, headlight shell, headlamp bracket, rear brake lever, horn, fork sliders, air cleaner, dash pannel, tappet covers, oil filter bracket, oli tank dip stick, carb top cover, tranny dip stick, risers and top clamp, wheel spacers, rear axle adjusters, shifter linkage, fuel cap.

__________________
2003 FXD; 2004 Ultra; 2006 883L (the girlfriends)

06 parts off Ultra:
Stock lower legs for Front end...This is the entire rt and left fork...Guts and all...
cow bells for front end both chrome and brushed...
Twin Calipers Blk for the front end...
twin rotors for the twin calipers...
Brake pads for the twin calipers...
Will have shortly the blk front brake master cylinder and blk clutch perch...
All I gotta do is change out the ones I have for those stock black ones...
I will have shortly the stock handle bars...and stock switch housings...
I will also have the stock gauges...Blk Faces...@ 3500 miles on odometer...
Shortly I will have the rear caliper and stock rear rotor...All I gotta do is swap out what I have for the other...
Front end has @2500 miles on it...
make me an offer
I live down here in Texas 75052 Zip

__________________
Ride Safe
paul

NEW 80 spoke tubeless rear wheel w/bearings (touring) still in box $795 new never installed make offer Used Parts
90th etched windshield (eagle & flag) Etching alone was $100.
Windshield off 03
12 CD Pioneer changer
1 stock touring muffler 03
1 rear 6 cluster light rail
custom made chrome extended handlebars pre 93
set of air horns w/compressor
set of stock rockers
2 front rotors & 1 rear 03 (300 miles)
set of lower forks 03 (300 miles)
set of air shocks 03 (300 miles)
complete stock header system w/all heat shields
Make an offer on any.

__________________
2003 Ultra
Port & Bore by Big Boyz
95" SE Flat tops
SE Perfect Fit pushrods
9.8:1 compression
Andrews 26G. Gear drive
.030 Cometic
Feuling plate & pump
SE roller rockers.
Baker DD6
V&H True Duals
Super Trapps
Tmax w/Auto

I have the following off an 2006 street glide:
lower legs
upper tins (cow bells)
skirt
hand levors
complete stock exaust
stock rotors (2) (aprox 200 miles on them)
crash bar

stock slip on mufflers
two pair stock foor pegs
stock chrome gas cap and fuel gauge
stock two-up seat

all from 2006 Dyna Wide Glide

__________________
Scott Wilson - Rockwall, TX USA
"These go to eleven..." - Nigel Tufnel

I have stock lower legs, cow bells, levers, and switch housings off a 2006 Street Glide. Make me a offer.

Dean
Columbus, Ohio