Quentin Vaulet 97 Harley-Davidson Sportster 1200
The AMD World Championships in Cologne are over but there are still some genuinely great bikes that were shown to share with everyone. Here’s one from Belgium that’s been hand built in a basement by Quentin Vaulet, or as he prefers to call his garage adventures, “Charging Lion.”
“It’s a personal project (and a pretext) for which I completely surrender myself to the creation of motorcycle.” This bike is called “The Thief.”
“My name is Quentin Vaulet. I’m 29 and I’m an architect from Belgium. I am not a professional builder, I’m just a passionate bike lover. It was my grandfather who taught me to love metal; the smell, the feel. I work alone in my basement where I founded Charging Lion.”
Quentin bought the bike used in 2013. while searching for an XL1200C with carbs so he could work on an affordable Harley twin. “Sportsters are a good compromise and I think they have an interesting geometry.
It seemed to me that the overall line of the bike could be improved by changing the rake, reducing the length of the forks about 4 inches and stretching the back a little.” “For me it’s the perfect visual balance for an old school Harley Davidson bobber.”
Quentin’s idea was to build a bike by trying to think like a bike designer from the 1920s and how they would build a futuristic motorcycle. “It’s the opposite of conventional thinking. Instead of thinking how I could make a vintage motorcycle out of a new bike, I began to think how I could design a futuristic motorbike if I were using the resources and ideas available to someone from the ‘20s. Needless to say, most of the new components were made by hand to stay true to this idea”.
The original frame rear was dumped in for a hard tail that stretches by 2 inches and lowering the bike by about 4. “Then for the forks and bars, I dumped the original shocks and made up a new set of springers. But the really interesting thing about the forks is the top triple tree. I wanted to lower the handlebars as far as possible, so I decided to weld them directly to the top triple tree. They are made from 6 pieces of tube and I used a classic scrambler shape for inspiration.” Great pains were taken to get all the fiddly bits inside the ‘bars, and Brooks leather grips were added to finish things up nicely.
Wheels? I used two old shovel hubs with some black aftermarket rims and Avon Speedmaster MKII tires to get a classic, hot rod look. The front light is an old CEV moped headlight; I love it because its size is perfect and you can put a speedo in it. I made lots of mods so I could put the Harley reflector system in it AND a Harley speedo as well. I worked on a mounting system which would complement the headlight’s shape. The rear light is a classic Ford duo lamp”.
Quentin re-shaped the aluminum engine cover to make sure he reduced the focal point of the stocker’s size. The primary cover comes from EMD and the air filter is a Velociraptor from Kuryakyn.
“The next job was to get all the wiring inside the frame. Headache! Got there in the end, though. The electrical box below the seat is made it with an old gas mask box that I found in a flea market. The battery, CDI box and the like are all made by hand to fit the frame as cleanly and be as minimal as possible.”
“The gas tank is a Cole Foster design. He’s a man whose work I really like. Big influence. The oil tank is a CB750 aftermarket unit with a cool speedster-style that I adapted for the Sportster’s oil capacity.”
“The aluminium rear fender was a handmade piece ordered from 7 Metal West in Milwaukee; the leather solo seat was handmade by Rich Phillips in Saint Louis.”
The non painted bits are all powder coated in black and the bodywork was sprayed in a color called Frozen Bronze. “And yes,” says Quentin, “there’s no front brake. It’s a classic, clean bobber so I didn’t put one on. Whatever. The rear one is an adapted Harley Sportster unit.”
