|
Your picture can't be correct. If blue is for turns, there should be 2, 1 for left and 1 for right turn.
LED's are polarity sensitive so try blue ground and red to hot. You'll need to bring a few wires into the bucket. Tap into your front RUNNING LIGHTS at the connection under the console. |
I think I got what I paid for. Today I wired the drl wire over to the positive wire at the cigarette lighter plug and once again the halo flicks on and then off. I also washed the bike today and used my normal soft rag and it left scratches on the lense...lol. I'm gonna try and return this sucker, maybe all I'll be out is the return shipping. Live and learn!
|
Not sure which bike you have but my 14 Limited plugged into a wire in the top left corner of the Bat Wing. It was tucked in out of site. Once you find it the Harley halo will plug right in or you could use for after markets like Kuryakyn's. I switched mine to Kuryakyn because the HD was not white enough.
|
I’m sure you’ve figured it out already , but the white wire get T-sliced to the low beam wire from the harness. The yellow wire is for turn signals the halo flashes yellow when the signal is on. I haven’t figured out where exactly to spice the yellow in yet so I just taped it off. |
Trying to use rocker switch to make halo work
Hey blue duece, I'm having trouble wiring the halo to a rocker switch. Any advice it's for my wifes 2014 softtail slim. Does not have lighter for power.
Originally Posted by 02BlueDeuce
(Post 14837707)
I have a Vision X Led headlight w/DRL on my 14 SGS. I took the DRL wire and ran it to a on/off toggle switch and ran that to a constant on, that way I can run it when I want. Nice touch if you want to leave it going after dark for a bit when your parked somewhere for the cool factor.
|
| All times are GMT -5. The time now is 07:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands