Fairing width help please
Thread Starter
|
Tourer
Joined: Jul 2012
Posts: 284
Likes: 12
From: Eugene, Or / Sammamish, WA
Fairing width help please
Need some help from someone who has their bike handy. My bike is two states away and I'm setting up my trailer and need to know the center of the wheel to the outer edge of the fairing. Going to be running the e track and a condor wheel chock and need to know how far away from the wall I need to e track.
Mucho grassy a$$
Mucho grassy a$$
Stellar HDF Member
Joined: Mar 2013
Posts: 2,718
Likes: 1,822
From: In a house
Don't forget to take a look under your trailer to see where the support is. I have an 8x12 and there are metal support beams on both outer edges and right up the middle so that's where my e-track went. Centered the condor wheel chocks between the edge and center and no issues with fairing clearance.
Road Master
Joined: Jan 2012
Posts: 895
Likes: 306
From: se wi
How wide of a trailer? I have a 7x14 and put three strips of etrack in. One along each wall and one dead center of the trailer. Have the condor chock and also bought the etrack adaptor for it. Put 2 sg in the trailer with no problem.
Thread Starter
|
Tourer
Joined: Jul 2012
Posts: 284
Likes: 12
From: Eugene, Or / Sammamish, WA
trailer is also 7 x 12 with 3 foot V nose. Given that it is 38 3/4 inches wide Im gonna run it at 21 inches from each wall and one straight down the center so its pretty much every 20 inches across. Then Im going to run one on the each wall at the base and then one at 4 foot high.
Thread
Thread Starter
Forum
Replies
Last Post
cmtbasser
Want To Buy Motorcycles/Parts/Accessories
0
Oct 1, 2009 08:54 AM
