Hello all
Look what I found, a forum just for the misfits who have a new touring models!
|
Hello!
|
Let me ask the first technical question :)
I'm adding tour-pak speakers to my 24 Road Glide. I ordered the 500W amplifier (which I understand is required to provide 4 speaker capability). I also ordered some Rockford Fosgate stage 1 speakers. A pair for the fairing and a pair to fit in the tour-pak speaker enclosures. There is a harness with a connector under the seat that carries audio cables from the amp. This is used for the saddlebag speaker setup. Looking at the installation instructions for the saddlebag speakers it shows the audio cables are in pins 5,6 for channel three and 7,8 for channel 4. https://cimg9.ibsrv.net/gimg/www.hdf...95f49b13d5.jpg So.. Are these speaker level, or line level? Can I just make up my own custom harness/plug and connect these wires directly to the speakers? (And.. I know about selecting speakers through the IFCU speaker setup routine and that the amp will most likely need a firmware update after I install it). |
@Rounders Man, I feel special now!
|
Originally Posted by jwt873
(Post 21650509)
Let me ask the first technical question :)
I'm adding tour-pak speakers to my 24 Road Glide. I ordered the 500W amplifier (which I understand is required to provide 4 speaker capability). I also ordered some Rockford Fosgate stage 1 speakers. A pair for the fairing and a pair to fit in the tour-pak speaker enclosures. There is a harness with a connector under the seat that carries audio cables from the amp. This is used for the saddlebag speaker setup. Looking at the installation instructions for the saddlebag speakers it shows the audio cables are in pins 5,6 for channel three and 7,8 for channel 4. https://cimg9.ibsrv.net/gimg/www.hdf...95f49b13d5.jpg So.. Are these speaker level, or line level? Can I just make up my own custom harness/plug and connect these wires directly to the speakers? (And.. I know about selecting speakers through the IFCU speaker setup routine and that the amp will most likely need a firmware update after I install it). |
Maybe they should go and move the threads created elsewhere to here
on edit- it appears they moved all the threads but my 24 audio thread….pffft, probably cuz I was a no vote on their poll! |
|
Oh yeah!
|
Originally Posted by jwt873
(Post 21650509)
Let me ask the first technical question :)
I'm adding tour-pak speakers to my 24 Road Glide. I ordered the 500W amplifier (which I understand is required to provide 4 speaker capability). I also ordered some Rockford Fosgate stage 1 speakers. A pair for the fairing and a pair to fit in the tour-pak speaker enclosures. There is a harness with a connector under the seat that carries audio cables from the amp. This is used for the saddlebag speaker setup. Looking at the installation instructions for the saddlebag speakers it shows the audio cables are in pins 5,6 for channel three and 7,8 for channel 4. https://cimg9.ibsrv.net/gimg/www.hdf...95f49b13d5.jpg So.. Are these speaker level, or line level? Can I just make up my own custom harness/plug and connect these wires directly to the speakers? (And.. I know about selecting speakers through the IFCU speaker setup routine and that the amp will most likely need a firmware update after I install it). |
All times are GMT -5. The time now is 09:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands