Post a PIC of your custom for us here.
#171
The following 2 users liked this post by Albe:
Phatdad (12-28-2020),
RoadKing904 (02-13-2022)
#179
this is my 78 Shovelhead, hope ya like it people,
took me a few years collecting bits but all done & it goes like hot snot as we say here in England,.... Wiseco 9.5:1 pistons, Lienweber L2S cam, RT BIKER borocilicate push rod covers, Lectron Carb, Morris Magneto, S&S oil pump with a JBROSG oil filter end cover with direct feed filtration, Throwback Cycles rocker boxes & air scoop, Wagon wheel rear wheel off an 04 RK, METMACHEX Swingarm, Shock Factory Shocks, GMA front calipers, 3'' Karata belt drive, diaphragm clutch, Cannonball Stealth Starter spinning it over from the right side through the kicker gear so no ring gear on the belt basket, HD BREMBO REAR calipers, CORBIN SADDLE, ENOTS flip up race gas cap, Thunderheart Forwards off of a Gilroy Indian Sccout, OHLIN steering Damper, fork brace,Avon's front & back,... runs & pulls like a freight train
took me a few years collecting bits but all done & it goes like hot snot as we say here in England,.... Wiseco 9.5:1 pistons, Lienweber L2S cam, RT BIKER borocilicate push rod covers, Lectron Carb, Morris Magneto, S&S oil pump with a JBROSG oil filter end cover with direct feed filtration, Throwback Cycles rocker boxes & air scoop, Wagon wheel rear wheel off an 04 RK, METMACHEX Swingarm, Shock Factory Shocks, GMA front calipers, 3'' Karata belt drive, diaphragm clutch, Cannonball Stealth Starter spinning it over from the right side through the kicker gear so no ring gear on the belt basket, HD BREMBO REAR calipers, CORBIN SADDLE, ENOTS flip up race gas cap, Thunderheart Forwards off of a Gilroy Indian Sccout, OHLIN steering Damper, fork brace,Avon's front & back,... runs & pulls like a freight train
Last edited by magnum45pete; 12-24-2022 at 12:58 PM.
#180