Mouser

538-33471-0201
538-33481-0201
538-34345-0001
538-33012-2001

crimp tool

 

Got that, just need to know the pin layouts please, any schematics on the site?

 

what specifically do you need to know then? speaker wire pin outs? entire radio pin outs?

4.3 or 6.5 radio?

 

Looking for info to make coupling pass through harness that allows to access the rear speakers when installing an 4 channel amp but let everything else pass through on 14 up.

 

I can give you what you need, just need to know what bike and what radio

 

Namz Custom Motorcycle Parts has all the components you need to accomplish your goals. They also may have premade solutions or be willing to make it for you. I also set up a detachable tourpak on a 14 Streetglide Special and was going to make the necessary harness and discovered they had exactly what I was looking for. In speaking with them they told me that they would make something if they didn't already provide it. I set up my tourpak like a CVO model and ended up drilling almost 30 holes to attach all the lights and run wiring. The Only thing I didn't do is the controls on the speaker pods. The Only thing I had to fabricate is one 12 pin sealed Molex 150 to reduce 3 connectors to 1 for ease of disconnect. I also modified a bit and have 12v outlet hot all the time for convenience of device charging by running off lead for LED interior lighting.

 

I could use some help here also. Putting Sony in 2017 Cop bike and need harness that plugs into the radio. I have controls and correct Scoche kit, just missing what the Scoche plugs into. Can't seem to find any info on what I assume to be an overlay harness. Thanks, Ed

 

I recommend you start a fresh thread. This one started 4 years ago and relates to an older model bike than yours. Give full details of your bike including model, same for your Sony.